Repocop reports by srpm

  rpm id test Status message
bash-devel-3.2.57-alt3.x86_64 rpm-filesystem-conflict-file-file warn There are file conflicts with the package bash4-devel-4.2.50-alt1.1.x86_64, for example, /usr/include/bash/alias.h (38 file conflicts in total). Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives.
bash-examples-3.2.57-alt3.noarch unsafe-tmp-usage-in-scripts info The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/share/doc/bash-3.2.57/examples/misc/cshtobash: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash-3.2.57/examples/misc/cshtobash # zsh-3.0. # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.? cshout cshin' 0 1 2 3 6 15 T=$'\t' SOURCE="${1:+source $1}" cat << EOF >cshin $SOURCE alias >! /tmp/cb$$.a setenv >! /tmp/cb$$.e set >! /tmp/cb$$.v EOF # give csh a minimal environment, similar to what login would provide /usr/bin/env - USER=$USER HOME=$HOME PATH=/usr/bin:/bin:/usr/ucb:. TERM=$TERM SHELL=$SHELL /bin/csh -i < ./cshin > cshout 2>&1 # First convert aliases cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- *) echo alias ${1}=\'$(echo "${2}" | sed "s:':'\\\\'':")\' ;; esac } EOF sed "s/^\([a-zA-Z0-9_]*\)$T\(.*\)$/mkalias \1 '\2'/" < /tmp/cb$$.a >>/tmp/cb$$.1 echo '# csh aliases' echo $BASH /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' -- # Would be nice to deal with embedded newlines, e.g. in TERMCAP, but ... sed -e '/^SHLVL/d' \ -e '/^PWD/d' \ -e "s/'/'"\\\\"''"/g \ -e "s/^\([A-Za-z0-9_]*=\)/export \1'/" \ -e "s/$/'/" < /tmp/cb$$.e # Finally, convert local variables echo echo '# csh variables' echo -- sed -e 's/'"$T"'/=/' \ -e "s/'/'"\\\\"''"/g \ -e '/^[A-Za-z0-9_]*=[^(]/{ s/=/='"'/"' s/$/'"'/"' }' < /tmp/cb$$.v | sed -e '/^argv=/d' -e '/^cwd=/d' -e '/^filec=/d' -e '/^status=/d' \ -e '/^verbose=/d' \ -e '/^term=/d' \ -e '/^home=/d' \ -e '/^path=/d' \ -- # now some special csh variables converted to bash equivalents echo echo '# special csh variables converted to bash equivalents' echo sed -e 's/'"$T"'/=/' < /tmp/cb$$.v | grep "^cdpath=" | sed 's/(// s/ /:/g s/)// s/cdpath=/CDPATH=/' sed -e 's/'"$T"'/=/' < /tmp/cb$$.v | grep "^mail=" | sed 's/(// s/ /:/g s/)// s/mail=/MAILPATH=/' | Found error in /usr/share/doc/bash-3.2.57/examples/misc/aliasconv.sh: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash-3.2.57/examples/misc/aliasconv.sh # usage: aliasconv.sh # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.?' 0 1 2 3 6 15 T=' ' cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- # the first thing we want to do is to protect single quotes in the alias, # since they whole thing is going to be surrounded by single quotes when # passed to mkalias sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>/tmp/cb$$.1 sh /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' Found error in /usr/share/doc/bash-3.2.57/examples/misc/aliasconv.bash: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash-3.2.57/examples/misc/aliasconv.bash # usage: aliasconv.bash # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.?' 0 1 2 3 6 15 T=$'\t' cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- # the first thing we want to do is to protect single quotes in the alias, # since they whole thing is going to be surrounded by single quotes when # passed to mkalias sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>/tmp/cb$$.1 $BASH /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' Found error in /usr/share/doc/bash-3.2.57/examples/scripts/bcsh.sh: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash-3.2.57/examples/scripts/bcsh.sh ;; esac trap ':' 2 trap exit 3 trap "tail -n $savehist $histfile>/tmp/hist$$;uniq /tmp/hist$$ > $histfile;\ rm -f /tmp/*$$;exit 0" 15 getcmd=yes mailcheck= exclaim= echoit= -- while test "$line" != "end"; do echo $n "$PS2$c" read line cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ ed - /tmp/bcsh$$ << ++++ s/end/done/ s/foreach[ ]\(.*\)(/for \1 in / s/)// s/;/;do / w -- line=done ;; esac cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ ;; if[\ \ ]*) while test "$line" != "fi" && test "$line" != "endif" do echo $n "$PS2$c" -- line=fi ;; esac cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ case "`grep then /tmp/bcsh$$`" in "") # fix 'if foo bar' cases ed - /tmp/bcsh$$ << ++++ s/)/);then/ s/.*/;fi/ w ++++ ;; -- echo $n "$PS2$c" read line cmd="${cmd}@$line" done cmd="`echo \"$cmd\" | tr '@' ' '`" echo "$cmd" > /tmp/bcsh$$ ;; switch[\ \ ]*) while test "$line" != "endsw" do echo $n "$PS2$c" read line cmd="${cmd}@$line" done echo "$cmd" > /tmp/bcsh$$ ed - /tmp/bcsh$$ << '++++' 1,$s/@/\ /g g/switch.*(/s//case "/ s/)/" in/ 1,$s/case[ ]\(.*\):$/;;\ -- g/breaksw/s/// 1,$s/default.*/;;\ *)/ w ++++ cmd="`cat /tmp/bcsh$$`" ;; *!*) hist=yes ;; esac -- echoit=yes getcmd=no continue ;; *~e) echo "$cmd" | sed -e "s@~e@@" > /tmp/bcsh$$ $EDITOR /tmp/bcsh$$ cmd="`cat /tmp/bcsh$$`" getcmd=no continue ;; *~v) echo "$cmd" | sed -e "s@~v@@" > /tmp/bcsh$$ echo "$lastcmd" > /tmp/bcsh$$ $VISUAL /tmp/bcsh$$ cmd="`cat /tmp/bcsh$$`" getcmd=no continue ;; exec[\ \ ]*) tail -n $savehist $histfile>/tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ ;; login[\ \ ]*|newgrp[\ \ ]*) tail -n $savehist $histfile>/tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ ;; logout|exit|bye) if test -s "$logoutfile" then # sh $logoutfile $SHELL $logoutfile fi tail -n $savehist $histfile > /tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ exit 0 ;; h|history) grep -n . $histfile | tail -n $history | sed -e 's@:@ @' | $PAGER continue -- continue ;; source[\ \ ]*) set - $cmd shift echo . $* > /tmp/cmd$$ . /tmp/cmd$$ run=no ;; wait) wait run=no ;; .[\ \ ]*) echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ run=no ;; cd|cd[\ \ ]*) # check if it will work first, or else this shell will terminate # if the cd dies. If you have a built-in test, you might want # to replace the try-it-and-see below with a couple of tests, # but it is probably just as fast like this. echo $cmd > /tmp/cmd$$ if ($SHELL /tmp/cmd$$) ; then . /tmp/cmd$$ fi run=no ;; awk[\ \ ]*|dd[\ \ ]*|cc[\ \ ]*|make[\ \ ]*) # these are the only commands I can think of whose syntax # includes an equals sign. Add others as you find them. echo "$cmd" > /tmp/bcsh$$ ;; setenv*|*=*) # handle setting shell variables, turning cshell syntax to Bourne # syntax -- note all variables must be exported or they will not # be usable in other commands echo "$cmd" > /tmp/cmd$$ ed - /tmp/cmd$$ << ++++ g/^setenv[ ]/s/[ ]/@/ g/^setenv@/s/[ ]/=/ g/^setenv@/s/// g/^set/s/// .t. \$s/=.*// s/^/export / w ++++ . /tmp/cmd$$ rm -f /tmp/cmd$$ run=no ;; unset[\ \ ]*|umask[\ \ ]*|export[\ \ ]*|set[\ \ ]*) # handle commands which twiddle current environment -- continue ;; esac ;; *) echo "$cmd" > /tmp/bcsh$$ ;; esac ;; no) echo "$cmd" > /tmp/bcsh$$ ;; esac ;; esac -- ;; *) case "$exclaim" in yes) cmd="`echo \"$cmd\" | sed -e 's@REALEXCLAMATIONMARK@!@g'`" echo "$cmd" > /tmp/bcsh$$ ;; esac case "$echoit" in yes) echo $cmd -- yes) case "${noclobber+yes}" in yes) case "$cmd" in *\>![\ \ ]*) ed - /tmp/bcsh$$ << ++++ g/>!/s//>/ w ++++ ;; *\>\>*) -- read answer case "$answer" in y*) ;; *) echo ':' > /tmp/bcsh$$ ;; esac ;; *) echo "${outfile}: file exists" echo ':' > /tmp/bcsh$$ ;; esac fi ;; esac -- esac ;; *) case "$cmd" in *\>![\ \ ]*) ed - /tmp/bcsh$$ << ++++ g/>!/s//>/g w ++++ ;; esac ;; esac (trap 'exit 1' 2 3; $BASH /tmp/bcsh$$) ;; esac case "$cmd" in $lastcmd) ;;

generated by repocop at Sat May 26 04:40:16 2018