| |
rpm id |
test |
status |
message |
 |
acct-6.6.4-alt1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/acct: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
 |
alt-gpgkeys-0.7.168-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
alt-gpgkeys-utils-0.7.168-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
altlinux-release-sisyphus-20081222-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /etc/altlinux-release conflicts with the package altlinux-release-icarus-20160328-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
anacron-2.3-alt7.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/anacron: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
anacron-2.3-alt7.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
anonftp-3.2-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
app-defaults-0.2.8.5-alt1.noarch |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
app-defaults-0.2.8.5-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
apt-conf-sisyphus-9.96-alt4.x86_64 |
rpm-obsolete-live-package |
info |
The package obsoletes the package apt-conf-branch-9.0-alt5.x86_64, but the package apt-conf-branch-9.0-alt5.x86_64 is still alive and in the repository. Ask its maintainer to remove it, or, if it should not be removed, remove the Obsoletes: tag. Do not forget to add explicit conflicts with the other package if nessessary. |
|
arpwatch-2.1a15-alt8.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/arpwatch: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
 |
artha-1.0.3-alt1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
automake-common-0.4.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
automake_1.10-1.10.3-alt5.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.10-1.10.3-alt5.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.4-1.4p6-alt8.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.4-1.4p6-alt8.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.6-1.6.3-alt10.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.6-1.6.3-alt10.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.7-1.7.9-alt4.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.7-1.7.9-alt4.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.9-1.9.6-alt7.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
automake_1.9-1.9.6-alt7.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/aclocal
/usr/bin/automake |
|
basesystem-sisyphus-alt22.noarch |
missing-url |
info |
Missing Url: in a package. |
|
bash-4.4.23-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
bash-builtin-lockf-0.3.1-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
bash-builtin-lockf-debuginfo-0.3.1-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
bash-devel-4.4.23-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
bash3-examples-3.2.57-alt4.noarch |
unsafe-tmp-usage-in-scripts |
info |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/share/doc/bash3-3.2.57/examples/scripts/bcsh.sh: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash3-3.2.57/examples/scripts/bcsh.sh ;; esac trap ':' 2 trap exit 3 trap "tail -n $savehist $histfile>/tmp/hist$$;uniq /tmp/hist$$ > $histfile;\ rm -f /tmp/*$$;exit 0" 15 getcmd=yes mailcheck= exclaim= echoit= -- while test "$line" != "end"; do echo $n "$PS2$c" read line cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ ed - /tmp/bcsh$$ << ++++ s/end/done/ s/foreach[ ]\(.*\)(/for \1 in / s/)// s/;/;do / w -- line=done ;; esac cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ ;; if[\ \ ]*) while test "$line" != "fi" && test "$line" != "endif" do echo $n "$PS2$c" -- line=fi ;; esac cmd="${cmd};$line" done echo "$cmd" > /tmp/bcsh$$ case "`grep then /tmp/bcsh$$`" in "") # fix 'if foo bar' cases ed - /tmp/bcsh$$ << ++++ s/)/);then/ s/.*/;fi/ w ++++ ;; -- echo $n "$PS2$c" read line cmd="${cmd}@$line" done cmd="`echo \"$cmd\" | tr '@' ' '`" echo "$cmd" > /tmp/bcsh$$ ;; switch[\ \ ]*) while test "$line" != "endsw" do echo $n "$PS2$c" read line cmd="${cmd}@$line" done echo "$cmd" > /tmp/bcsh$$ ed - /tmp/bcsh$$ << '++++' 1,$s/@/\ /g g/switch.*(/s//case "/ s/)/" in/ 1,$s/case[ ]\(.*\):$/;;\ -- g/breaksw/s/// 1,$s/default.*/;;\ *)/ w ++++ cmd="`cat /tmp/bcsh$$`" ;; *!*) hist=yes ;; esac -- echoit=yes getcmd=no continue ;; *~e) echo "$cmd" | sed -e "s@~e@@" > /tmp/bcsh$$ $EDITOR /tmp/bcsh$$ cmd="`cat /tmp/bcsh$$`" getcmd=no continue ;; *~v) echo "$cmd" | sed -e "s@~v@@" > /tmp/bcsh$$ echo "$lastcmd" > /tmp/bcsh$$ $VISUAL /tmp/bcsh$$ cmd="`cat /tmp/bcsh$$`" getcmd=no continue ;; exec[\ \ ]*) tail -n $savehist $histfile>/tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ ;; login[\ \ ]*|newgrp[\ \ ]*) tail -n $savehist $histfile>/tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ ;; logout|exit|bye) if test -s "$logoutfile" then # sh $logoutfile $SHELL $logoutfile fi tail -n $savehist $histfile > /tmp/hist$$ uniq /tmp/hist$$ > $histfile rm -f /tmp/*$$ exit 0 ;; h|history) grep -n . $histfile | tail -n $history | sed -e 's@:@ @' | $PAGER continue -- continue ;; source[\ \ ]*) set - $cmd shift echo . $* > /tmp/cmd$$ . /tmp/cmd$$ run=no ;; wait) wait run=no ;; .[\ \ ]*) echo $cmd > /tmp/cmd$$ . /tmp/cmd$$ run=no ;; cd|cd[\ \ ]*) # check if it will work first, or else this shell will terminate # if the cd dies. If you have a built-in test, you might want # to replace the try-it-and-see below with a couple of tests, # but it is probably just as fast like this. echo $cmd > /tmp/cmd$$ if ($SHELL /tmp/cmd$$) ; then . /tmp/cmd$$ fi run=no ;; awk[\ \ ]*|dd[\ \ ]*|cc[\ \ ]*|make[\ \ ]*) # these are the only commands I can think of whose syntax # includes an equals sign. Add others as you find them. echo "$cmd" > /tmp/bcsh$$ ;; setenv*|*=*) # handle setting shell variables, turning cshell syntax to Bourne # syntax -- note all variables must be exported or they will not # be usable in other commands echo "$cmd" > /tmp/cmd$$ ed - /tmp/cmd$$ << ++++ g/^setenv[ ]/s/[ ]/@/ g/^setenv@/s/[ ]/=/ g/^setenv@/s/// g/^set/s/// .t. \$s/=.*// s/^/export / w ++++ . /tmp/cmd$$ rm -f /tmp/cmd$$ run=no ;; unset[\ \ ]*|umask[\ \ ]*|export[\ \ ]*|set[\ \ ]*) # handle commands which twiddle current environment -- continue ;; esac ;; *) echo "$cmd" > /tmp/bcsh$$ ;; esac ;; no) echo "$cmd" > /tmp/bcsh$$ ;; esac ;; esac -- ;; *) case "$exclaim" in yes) cmd="`echo \"$cmd\" | sed -e 's@REALEXCLAMATIONMARK@!@g'`" echo "$cmd" > /tmp/bcsh$$ ;; esac case "$echoit" in yes) echo $cmd -- yes) case "${noclobber+yes}" in yes) case "$cmd" in *\>![\ \ ]*) ed - /tmp/bcsh$$ << ++++ g/>!/s//>/ w ++++ ;; *\>\>*) -- read answer case "$answer" in y*) ;; *) echo ':' > /tmp/bcsh$$ ;; esac ;; *) echo "${outfile}: file exists" echo ':' > /tmp/bcsh$$ ;; esac fi ;; esac -- esac ;; *) case "$cmd" in *\>![\ \ ]*) ed - /tmp/bcsh$$ << ++++ g/>!/s//>/g w ++++ ;; esac ;; esac (trap 'exit 1' 2 3; $BASH /tmp/bcsh$$) ;; esac case "$cmd" in $lastcmd) ;; Found error in /usr/share/doc/bash3-3.2.57/examples/misc/aliasconv.sh: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash3-3.2.57/examples/misc/aliasconv.sh # usage: aliasconv.sh # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.?' 0 1 2 3 6 15 T=' ' cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- # the first thing we want to do is to protect single quotes in the alias, # since they whole thing is going to be surrounded by single quotes when # passed to mkalias sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>/tmp/cb$$.1 sh /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' Found error in /usr/share/doc/bash3-3.2.57/examples/misc/cshtobash: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash3-3.2.57/examples/misc/cshtobash # zsh-3.0. # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.? cshout cshin' 0 1 2 3 6 15 T=$'\t' SOURCE="${1:+source $1}" cat << EOF >cshin $SOURCE alias >! /tmp/cb$$.a setenv >! /tmp/cb$$.e set >! /tmp/cb$$.v EOF # give csh a minimal environment, similar to what login would provide /usr/bin/env - USER=$USER HOME=$HOME PATH=/usr/bin:/bin:/usr/ucb:. TERM=$TERM SHELL=$SHELL /bin/csh -i < ./cshin > cshout 2>&1 # First convert aliases cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- *) echo alias ${1}=\'$(echo "${2}" | sed "s:':'\\\\'':")\' ;; esac } EOF sed "s/^\([a-zA-Z0-9_]*\)$T\(.*\)$/mkalias \1 '\2'/" < /tmp/cb$$.a >>/tmp/cb$$.1 echo '# csh aliases' echo $BASH /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' -- # Would be nice to deal with embedded newlines, e.g. in TERMCAP, but ... sed -e '/^SHLVL/d' \ -e '/^PWD/d' \ -e "s/'/'"\\\\"''"/g \ -e "s/^\([A-Za-z0-9_]*=\)/export \1'/" \ -e "s/$/'/" < /tmp/cb$$.e # Finally, convert local variables echo echo '# csh variables' echo -- sed -e 's/'"$T"'/=/' \ -e "s/'/'"\\\\"''"/g \ -e '/^[A-Za-z0-9_]*=[^(]/{ s/=/='"'/"' s/$/'"'/"' }' < /tmp/cb$$.v | sed -e '/^argv=/d' -e '/^cwd=/d' -e '/^filec=/d' -e '/^status=/d' \ -e '/^verbose=/d' \ -e '/^term=/d' \ -e '/^home=/d' \ -e '/^path=/d' \ -- # now some special csh variables converted to bash equivalents echo echo '# special csh variables converted to bash equivalents' echo sed -e 's/'"$T"'/=/' < /tmp/cb$$.v | grep "^cdpath=" | sed 's/(// s/ /:/g s/)// s/cdpath=/CDPATH=/' sed -e 's/'"$T"'/=/' < /tmp/cb$$.v | grep "^mail=" | sed 's/(// s/ /:/g s/)// s/mail=/MAILPATH=/' | Found error in /usr/share/doc/bash3-3.2.57/examples/misc/aliasconv.bash: $ grep -A5 -B5 /tmp/ /usr/share/doc/bash3-3.2.57/examples/misc/aliasconv.bash # usage: aliasconv.bash # # Chet Ramey # chet@po.cwru.edu # trap 'rm -f /tmp/cb$$.?' 0 1 2 3 6 15 T=$'\t' cat << \EOF >/tmp/cb$$.1 mkalias () { case $2 in '') echo alias ${1}="''" ;; *[#\!]*) -- # the first thing we want to do is to protect single quotes in the alias, # since they whole thing is going to be surrounded by single quotes when # passed to mkalias sed -e "s:':\\'\\\'\\':" -e "s/^\([a-zA-Z0-9_-]*\)$T\(.*\)$/mkalias \1 '\2'/" >>/tmp/cb$$.1 $BASH /tmp/cb$$.1 | sed -e 's/\$cwd/\$PWD/g' \ -e 's/\$term/\$TERM/g' \ -e 's/\$home/\$HOME/g' \ -e 's/\$user/\$USER/g' \ -e 's/\$prompt/\$PS1/g' |
|
bash4-4.4.23-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
bind-9.11.13-alt1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/bind: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
bind-control-1.2-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
bind-devel-9.11.13-alt1.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
There are file conflicts with the package libisc-export-dhcp-devel-9.11.15-alt1.x86_64, for example, /usr/include/bind9/dns/acl.h (7 file conflicts in total). Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
binutils-2.32-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
binutils-devel-2.32-alt1.x86_64 |
library-pkgnames-static |
warn |
package contains static library which has the same name as a shared library in the repository, but neither package name ends with -devel-static according to http://altlinux.org/Drafts/SharedLibs nor the package explicitly conflicts with the package with .so library |
|
bootloader-utils-0.5.3-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
ca-certificates-2020.01.23-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
cdrkit-control-1.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
chkconfig-1.3.59-alt4.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
chkconfig-debuginfo-1.3.59-alt4.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
chkfontpath-2.0.3-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
chkfontpath-debuginfo-2.0.3-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
chrooted-0.3.9-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
chrooted-resolv-0.3.1-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
cmdproxyd-0.2-alt1.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
 |
cmdproxyd-0.2-alt1.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/cmdproxyd: not systemd compatible: lsb init header missing and cmdproxyd.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
cmdproxyd-0.2-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
cmdproxyd-debuginfo-0.2-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
common-licenses-1.8-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
consolehelper-0.3.2-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
consolehelper-debuginfo-0.3.2-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
control-0.8.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
coreutils-8.31.0.3.6bd78-alt2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
crontab-control-1.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
crontabs-1.8-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
cvs-1.11.23-alt7.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/sbin/cvsinitroot |
|
cvs-1.11.23-alt7.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
db4.7-utils-4.7.25-alt9.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
There are file conflicts with the package pks-db-0.9.6-alt3.x86_64, for example, /usr/bin/db_archive (8 file conflicts in total). Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
dejagnu-1.6.2-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/runtest |
|
dsniff-2.4-alt0.13.b1.x86_64 |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
dvdrwtools-control-1.2-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
etcskel-2.0.16-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
fakeroot-1.20.2-alt2.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/fakeroot |
|
filesystem-2.3.17-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
filterXQueryExtension-0.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
filterXQueryExtension-debuginfo-0.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
gawk-4.2.1.0.170.dc189d-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/profile.d/gawk.csh
/etc/profile.d/gawk.sh |
|
gawk-4.2.1.0.170.dc189d-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/profile.d/gawk.csh
/etc/profile.d/gawk.sh |
|
gettext-tools-0.20.1-alt1.x86_64 |
altlinux-policy-shared-lib-contains-devel-so |
info |
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libgettextpo.so but just /usr/lib64/libgettextpo.so.0.5.5. According to SharedLibs Policy Draft, symlink /usr/lib64/libgettextpo.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libgettextpo.so to \%files of gettext-tools-0.20.1-alt1.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test. |
|
gettext-tools-0.20.1-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
gettext-tools-0.20.1-alt1.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
glibc-devel-2.30-alt1.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
Files /usr/include/rpcsvc/rquota.h /usr/include/rpcsvc/rquota.x conflict with the package quota-devel-4.05.0.3.f2eb-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
glibc-gconv-modules-2.30-alt1.x86_64 |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
glibc-timezones-2.30-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/tzselect |
|
groupdel-cvsadmin-0.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
gzip-utils-1.10-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/zgrep /usr/bin/gzexe /usr/bin/zdiff |
|
hasher-1.4.1-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/hsh-mkchroot /usr/bin/hsh-sh-functions /usr/bin/hsh-sh-cache-chroot-functions /usr/bin/hsh-sh-cache-contents-functions /usr/bin/mkaptbox /usr/bin/hsh-initroot |
|
hasher-priv-1.6.0-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
hasher-priv-debuginfo-1.6.0-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
hasher-provides-dev-kvm-1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
info-install-6.5-alt2.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/sbin/update-info-dir |
|
initscripts-5.49.1-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
installer-feature-vm-ofs-stage2-0.3-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/share/install2/initinstall.d/05-vm-profile-ofs conflicts with the package installer-feature-vm-fs-stage2-0.3-alt2.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
installer-feature-vm-ofs-stage3-0.3-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/share/install2/preinstall.d/01-move-fs-ofs conflicts with the package installer-feature-vm-fs-stage3-0.3-alt2.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
interactivesystem-sisyphus-alt22.noarch |
missing-url |
info |
Missing Url: in a package. |
|
iptables-1.8.3-alt2.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/iptables |
|
iptables-1.8.3-alt2.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/iptables: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
iptables-ipv6-1.8.3-alt2.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/ip6tables |
|
iptables-ipv6-1.8.3-alt2.noarch |
init-lsb |
warn |
/etc/rc.d/init.d/ip6tables: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
john-1.8.0.2-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
kernel-source-4.14-1.0.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
kernel-source-4.20-1.0.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
kernel-source-5.0-1.0.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
kernel-source-5.1-1.0.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
kernel-source-5.2-1.0.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
lftp-4.8.4-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/icons/hicolor/48x48/apps/lftp-icon.png |
|
lftp-4.8.4-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/icons/hicolor/48x48/apps/lftp-icon.png |
|
lftp-4.8.4-alt1.x86_64 |
altlinux-policy-shared-lib-contains-devel-so |
info |
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/liblftp-jobs.so but just /usr/lib64/liblftp-jobs.so.0.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/liblftp-jobs.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/liblftp-jobs.so to \%files of lftp-4.8.4-alt1.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test.
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/liblftp-tasks.so but just /usr/lib64/liblftp-tasks.so.0.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/liblftp-tasks.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/liblftp-tasks.so to \%files of lftp-4.8.4-alt1.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test. |
|
libdb4.7-devel-static-4.7.25-alt9.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib64/libdb.a is different from the same symlink in the package libdb4.8-devel-static-4.8.30-alt4.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
libdb4.7_cxx-devel-static-4.7.25-alt9.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib64/libdb_cxx.a is different from the same symlink in the package libdb4.8_cxx-devel-static-4.8.30-alt4.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
libevent-devel-2.1.8-alt2.x86_64 |
sisyphus_check |
fail |
sisyphus_check failed: /ALT/Sisyphus/files/x86_64/RPMS/libevent-devel-2.1.8-alt2.x86_64.rpm: forbidden requires: python-base sisyphus_check: check-deps ERROR: package dependencies violation |
|
libflac-devel-1.3.2-alt2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
libgit-devel-2.24.1-alt1.x86_64 |
library-pkgnames-static |
warn |
package contains static library which has the same name as a shared library in the repository, but neither package name ends with -devel-static according to http://altlinux.org/Drafts/SharedLibs nor the package explicitly conflicts with the package with .so library |
|
libnoch-0.4.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
libnoch-debuginfo-0.4.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
libreadline-devel-7.0.3-alt3.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
There are file conflicts with the package libreadline5-devel-5.2.14-alt6.x86_64, for example, /usr/include/readline/chardefs.h (13 file conflicts in total). Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
libreadline-devel-7.0.3-alt3.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib64/libhistory.so is different from the same symlink in the package libreadline5-devel-5.2.14-alt6.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
libreadline-devel-static-7.0.3-alt3.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
Files /usr/lib64/libhistory.a /usr/lib64/libreadline.a conflict with the package libreadline5-devel-static-5.2.14-alt6.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
libstroke-0.5.1-alt11.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/aclocal/libgstroke.m4 |
|
libstroke-0.5.1-alt11.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/aclocal/libgstroke.m4 |
|
libtool_1.4-1.4.3-alt14.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/include/ltdl.h
/usr/lib/libltdl.a
/usr/lib/libltdl.so
/usr/lib/libltdl.so.3
/usr/lib/libltdl.so.3.1.0
/usr/share/aclocal/ltdl.m4
/usr/share/doc/libltdl-1.4.3/COPYING.LIB
/usr/share/doc/libltdl-1.4.3/README |
|
libtool_1.4-1.4.3-alt14.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/include/ltdl.h
/usr/lib64/libltdl.a
/usr/lib64/libltdl.so
/usr/lib64/libltdl.so.3
/usr/lib64/libltdl.so.3.1.0
/usr/share/aclocal/ltdl.m4
/usr/share/doc/libltdl-1.4.3/COPYING.LIB
/usr/share/doc/libltdl-1.4.3/README |
|
libutempter-1.1.6-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
libutempter-debuginfo-1.1.6-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
libutempter-devel-1.1.6-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
libutempter-devel-static-1.1.6-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lwresd-9.11.13-alt1.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
lwresd-9.11.13-alt1.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/lwresd: not systemd compatible: lsb init header missing and lwresd.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
mailx-8.1.2-alt7.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
mailx-debuginfo-8.1.2-alt7.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
mailx-debuginfo-8.1.2-alt7.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib/debug/usr/bin/Mail.debug is different from the same symlink in the package mailutils-debuginfo-3.6-alt1.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives.
value of symlink /usr/lib/debug/usr/bin/mailx.debug is different from the same symlink in the package mailutils-debuginfo-3.6-alt1.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
make-4.2.1-alt5.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/include/gnumake.h |
|
make-4.2.1-alt5.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/include/gnumake.h |
|
mkimage-profiles-office-server-5.0.0-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
mkve-0.22-alt2.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/mkve-sh-functions |
|
mkve-0.22-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
mkve-cache-0.22-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
mtree-3.7.20050808-alt2.qa1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
mtree-debuginfo-3.7.20050808-alt2.qa1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
ncurses-6.1.20180407-alt2.src |
beehive-log-non-strict-dependency-i586 |
info |
libncursesw-devel: non-strict dependency on libncurses++-devel |
|
ncurses-6.1.20180407-alt2.src |
beehive-log-non-strict-dependency-x86_64 |
info |
libncursesw-devel: non-strict dependency on libncurses++-devel |
|
ncurses-6.1.20180407-alt2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/terminfo |
|
noXShmQuery-0.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
noXShmQuery-debuginfo-0.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
nscd-2.30-alt1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/nscd: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
nscd-2.30-alt1.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
openntpd-3.9p1-alt14.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/ntpd: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
openssh-blacklist-0.3.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
openssh-blacklist-utils-0.3.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
openssh-blacklist-utils-debuginfo-0.3.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
openssh-clients-7.9p1-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/rescp |
|
openssh-server-7.9p1-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/sshd |
|
openssh-server-7.9p1-alt1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/sshd: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
pam-1.3.1.0.5.955b-alt2.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
pam-config-1.7.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
pam-config-control-1.7.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
pam0-config-1.7.0-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
pam0_console-1.0.0-alt1.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
pam0_console-1.0.0-alt1.x86_64 |
systemd-files-in-etc |
warn |
Systemd files Policy Draft violation: etc/tmpfiles.d/ is reserved for sysadmin overrides. Please, move /etc/tmpfiles.d/pamconsole.conf to \%_tmpfilesdir/. |
|
pam0_userpass-1.0.2-alt6.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
pkg-config-0.29.2-alt3.x86_64 |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
postfix-2.11.11-alt2.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/postfix: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
postfix-control-1.6.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
powermgmt-base-1.22-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
powermgmt-base-1.22-alt1.qa1.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
powermgmt-base-debuginfo-1.22-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
ppp-common-0.5.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
quota-devel-4.05.0.3.f2eb-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
Files /usr/include/rpcsvc/rquota.h /usr/include/rpcsvc/rquota.x conflict with the package glibc-devel-2.30-alt1.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
quota-rpc-4.05.0.3.f2eb-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
readline-7.0.3-alt3.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/readline/CHANGES
/usr/share/doc/readline/INSTALL
/usr/share/doc/readline/README |
|
readline-7.0.3-alt3.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/readline/CHANGES
/usr/share/doc/readline/INSTALL
/usr/share/doc/readline/README |
|
rootfiles-alt-alt12.noarch |
missing-url |
info |
Missing Url: in a package. |
|
rpm-utils-0.10.3-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/rebuild_packages |
|
rpm-utils-0.10.3-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
rpm-utils-debuginfo-0.10.3-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
rpmrebuild-arepo-3.1.10-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
rpmrebuild-arepo-scripts-3.1.10-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
rss2email-2.71-alt1.noarch |
sisyphus_check |
fail |
sisyphus_check failed: /ALT/Sisyphus/files/noarch/RPMS/rss2email-2.71-alt1.noarch.rpm: forbidden requires: /usr/bin/python sisyphus_check: check-deps ERROR: package dependencies violation |
|
rsync-server-3.1.3-alt1.noarch |
systemd-check-socket-name |
experimental |
in rsync-server-3.1.3-alt1.noarch: there is a socket rsyncd.socket but no service rsyncd.service. Ask ildar@ why it is not right. |
|
samba-client-control-1.2-alt2.noarch |
missing-url |
info |
Missing Url: in a package. |
|
scanlogd-2.2.6-alt2.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
scanlogd-2.2.6-alt2.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/scanlogd: not systemd compatible: lsb init header missing and scanlogd.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
screen-4.6.2-alt2.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
sdf-2.001-alt3.1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/man/man1/pod2sdf.1.xz |
|
sdf-2.001-alt3.1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/man/man1/pod2sdf.1.xz |
|
sendmail-common-1.7-alt3.noarch |
missing-url |
info |
Missing Url: in a package. |
|
service-0.5.31-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /sbin/limited /etc/rc.d/init.d/functions |
|
service-0.5.31-alt1.x86_64 |
init-condrestart |
warn |
warning: found files in /etc/init.d/; better to use %_initdir=/etc/rc.d/init.d |
|
setproctitle-0.3.2-alt3.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
setproctitle-0.3.2-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
setproctitle-debuginfo-0.3.2-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
setproctitle-devel-0.3.2-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
setup-2.2.16-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
sgmltools-lite-3.0.3-alt6.2.1.noarch |
sisyphus_check |
fail |
sisyphus_check failed: /ALT/Sisyphus/files/noarch/RPMS/sgmltools-lite-3.0.3-alt6.2.1.noarch.rpm: forbidden requires: /usr/bin/python sisyphus_check: check-deps ERROR: package dependencies violation /ALT/Sisyphus/files/noarch/RPMS/sgmltools-lite-3.0.3-alt6.2.1.noarch.rpm: The use of such a license name is ambiguous: GPL |
|
sh-4.4.23-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
sisyphus-0.9.2-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/sisyphus_unpaired /usr/bin/sisyphus_cleanup_dups |
|
sisyphus-0.9.2-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
sisyphus_check-0.8.56-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
slocate-0.2.16-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
slocate-debuginfo-0.2.16-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
slocate-debuginfo-0.2.16-alt2.x86_64 |
rpm-filesystem-conflict-symlink-file |
warn |
symlink /usr/lib/debug/usr/bin/locate.debug is a file in the package mlocate-debuginfo-0.26-alt2.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
stardict-3.0.6-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
stardict-3.0.6-alt1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
startup-0.9.9.9-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/local /etc/rc.d/init.d/rawdevices /etc/rc.d/init.d/random /etc/rc.d/init.d/single |
|
startup-0.9.9.9-alt1.noarch |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
startup-0.9.9.9-alt1.noarch |
init-condrestart |
warn |
/etc/rc.d/init.d/clock: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/clock: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/halt: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/halt: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/killall: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/killall: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/local: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/local: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/netfs: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/netfs: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/random: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/random: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/single: missing condrestart target. Note: alt-specific script %_sbindir/post_service (used in %post_service macro) depends on condrestart. It is wise to add condrestart anyway./etc/rc.d/init.d/single: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway. |
|
startup-0.9.9.9-alt1.noarch |
init-lsb |
warn |
/etc/rc.d/init.d/clock: strange executable: neither lsb header nor chkconfig header aren't found. /etc/rc.d/init.d/fbsetfont: lsb init header missing. /etc/rc.d/init.d/halt: strange executable: neither lsb header nor chkconfig header aren't found. /etc/rc.d/init.d/killall: strange executable: neither lsb header nor chkconfig header aren't found. /etc/rc.d/init.d/local: strange executable: neither lsb header nor chkconfig header aren't found. /etc/rc.d/init.d/netfs: lsb init header missing. /etc/rc.d/init.d/random: lsb init header missing. /etc/rc.d/init.d/rawdevices: not systemd compatible: lsb init header missing and rawdevices.service is not present. /etc/rc.d/init.d/single: strange executable: neither lsb header nor chkconfig header aren't found. See http://www.altlinux.org/Services_Policy for details. |
|
startup-0.9.9.9-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
strace-5.5-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/strace-graph |
|
strace-5.5-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/strace-graph |
|
terminfo-extra-6.1.20180407-alt2.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/share/terminfo/f/fbterm conflicts with the package fbterm-1.7-alt3.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
texinfo-6.5-alt2.src |
altlinux-policy-tex-rpm-build-texmf |
warn |
According to TeX policy (http://www.altlinux.org/TeXPolicy) packages that install files to /usr/share/texmf should BuildRequires(pre): rpm-build-texmf for the dependency magic to work. |
|
texinfo-6.5-alt2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/ca.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/de.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/no.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/pt.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/pt_BR.us-ascii/LC_MESSAGES/texinfo_document.mo |
|
texinfo-6.5-alt2.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/ca.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/de.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/no.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/pt.us-ascii/LC_MESSAGES/texinfo_document.mo
/usr/share/locale/pt_BR.us-ascii/LC_MESSAGES/texinfo_document.mo |
|
texinfo-6.5-alt2.x86_64 |
arch-dep-package-consists-of-usr-share |
info |
The package consists of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
tzdata-2019c-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/localtime |
|
tzdata-2019c-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/localtime |
|
units-2.19-alt1.x86_64 |
sisyphus_check |
fail |
sisyphus_check failed: /ALT/Sisyphus/files/x86_64/RPMS/units-2.19-alt1.x86_64.rpm: forbidden requires: /usr/bin/python python-base sisyphus_check: check-deps ERROR: package dependencies violation |
|
url_handler-0.3.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
userpasswd-0.3.3-alt3.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/userpasswd.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
userpasswd-0.3.3-alt3.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
userpasswd-0.3.3-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
userpasswd-debuginfo-0.3.3-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
vitmp-1.0-alt4.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
vitmp-debuginfo-1.0-alt4.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
vixie-cron-4.1.20060426-alt10.1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/crond: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
vsftpd-3.0.3-alt1.x86_64 |
systemd-check-socket-name |
experimental |
in vsftpd-3.0.3-alt1.x86_64: there is a socket vsftpd.socket but no service vsftpd.service. Ask ildar@ why it is not right. |
|
wm-select-0.8.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
wm-select-debuginfo-0.8.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
xdm-1.1.12-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/X11/xdm/GiveConsole
/etc/X11/xdm/TakeConsole
/etc/X11/xdm/Xaccess
/etc/X11/xdm/Xreset
/etc/X11/xdm/Xresources
/etc/X11/xdm/Xservers
/etc/X11/xdm/Xsession
/etc/X11/xdm/Xsetup_0
/etc/X11/xdm/Xstartup
/etc/X11/xdm/Xwilling
/etc/X11/xdm/xdm-config |
|
xdm-1.1.12-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/X11/xdm/GiveConsole
/etc/X11/xdm/TakeConsole
/etc/X11/xdm/Xaccess
/etc/X11/xdm/Xreset
/etc/X11/xdm/Xresources
/etc/X11/xdm/Xservers
/etc/X11/xdm/Xsession
/etc/X11/xdm/Xsetup_0
/etc/X11/xdm/Xstartup
/etc/X11/xdm/Xwilling
/etc/X11/xdm/xdm-config |
|
xinetd-2.3.15-alt4.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/xinetd: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
xinitrc-2.4.47-alt2.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/dm |
|
xinitrc-2.4.47-alt2.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/dm: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
xinitrc-2.4.47-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
xinitrc-debuginfo-2.4.47-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
xres-1.3-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
xres-debuginfo-1.3-alt1.qa1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
xvfb-run-1.20.3-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
xxkb-1.11.1-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/xxkb.desktop: warning: value "X Keyboard switcher" for key "Comment" in group "Desktop Entry" looks redundant with value "X Keyboard switcher" of key "Name" |
|
zstd-1.4.3-alt1.x86_64 |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |