| |
packager |
rpm id |
test |
status |
message |
 |
@gnome |
python-module-pygtk-devel-2.24.0-alt6.x86_64 |
altlinux-python-obsolete-buildreq-python-dev |
warn |
python-dev is obsolete according to Python Policy (http://www.altlinux.org/Python_Policy). Please, use BuildRequires: python-devel. |
 |
@python |
libnumpy-debuginfo-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib/debug/usr/lib64/libnpymath.so.0.5.debug: Binary file /usr/lib/debug/usr/lib64/libnpymath.so.0.5.debug matches |
|
@python |
libnumpy-py3-debuginfo-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib/debug/usr/lib64/libnpymath3.so.0.7.debug: Binary file /usr/lib/debug/usr/lib64/libnpymath3.so.0.7.debug matches |
|
@python |
python-module-numpy-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib64/python2.7/site-packages/numpy/core/lib/libnpymath.a: Binary file /usr/lib64/python2.7/site-packages/numpy/core/lib/libnpymath.a matches |
|
@python |
python-module-numpy-debuginfo-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_dummy.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_dummy.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_struct_ufunc_tests.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_struct_ufunc_tests.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_multiarray_tests.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_multiarray_tests.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_rational_tests.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_rational_tests.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_operand_flag_tests.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_operand_flag_tests.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_umath_tests.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/_umath_tests.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/umath.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/umath.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/multiarray.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/core/multiarray.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/linalg/_umath_linalg.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/linalg/_umath_linalg.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/linalg/lapack_lite.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/linalg/lapack_lite.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/random/mtrand.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/random/mtrand.so.debug matches /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/fft/fftpack_lite.so.debug: Binary file /usr/lib/debug/usr/lib64/python2.7/site-packages/numpy/fft/fftpack_lite.so.debug matches |
 |
@python |
python-module-pycairo-1.18.1-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/PKG-INFO
/usr/lib/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/SOURCES.txt
/usr/lib/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/dependency_links.txt
/usr/lib/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/top_level.txt
/usr/lib/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/PKG-INFO
/usr/lib/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/SOURCES.txt
/usr/lib/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/dependency_links.txt
/usr/lib/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/top_level.txt |
|
@python |
python-module-pycairo-1.18.1-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/PKG-INFO
/usr/lib64/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/SOURCES.txt
/usr/lib64/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/dependency_links.txt
/usr/lib64/python2.7/site-packages/pycairo-1.18.1-py2.7.egg-info/top_level.txt
/usr/lib64/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/PKG-INFO
/usr/lib64/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/SOURCES.txt
/usr/lib64/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/dependency_links.txt
/usr/lib64/python3/site-packages/pycairo-1.18.1-py3.7.egg-info/top_level.txt |
|
@python |
python-module-wx-doc-2.8.0.1-alt2.1.noarch |
altlinux-policy-debian-menu-is-deprecated |
warn |
package contains deprecated /usr/lib/menu/ files. Please, convert to .desktop files |
|
@python |
python3-module-numpy-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib64/python3/site-packages/numpy/core/lib/libnpymath.a: Binary file /usr/lib64/python3/site-packages/numpy/core/lib/libnpymath.a matches |
|
@python |
python3-module-numpy-debuginfo-1.15.4-alt2.x86_64 |
buildroot |
fail |
found paths to buildroot: /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/umath.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/umath.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_multiarray_tests.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_multiarray_tests.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/multiarray.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/multiarray.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_dummy.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_dummy.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_operand_flag_tests.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_operand_flag_tests.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_rational_tests.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_rational_tests.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_umath_tests.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_umath_tests.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_struct_ufunc_tests.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/core/_struct_ufunc_tests.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/linalg/_umath_linalg.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/linalg/_umath_linalg.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/linalg/lapack_lite.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/linalg/lapack_lite.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/random/mtrand.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/random/mtrand.cpython-37m.so.debug matches /usr/lib/debug/usr/lib64/python3/site-packages/numpy/fft/fftpack_lite.cpython-37m.so.debug: Binary file /usr/lib/debug/usr/lib64/python3/site-packages/numpy/fft/fftpack_lite.cpython-37m.so.debug matches |
|
@python |
python3-module-pycairo-devel-1.18.1-alt1.x86_64 |
altlinux-python-python3-requires-python |
warn |
python3 package requires python-module-pycairo-common-devel. |
|
aris |
flatpak-1.4.2-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/zsh/site-functions/_flatpak |
|
aris |
flatpak-1.4.2-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/zsh/site-functions/_flatpak |
|
aris |
flatpak-1.4.2-alt1.x86_64 |
dbus-xml-not-in-devel |
info |
file /usr/share/dbus-1/interfaces/org.freedesktop.portal.Flatpak.xml is not used in run time. Move it to the -devel subpackage. |
|
aris |
ostree-2019.2-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
aris |
python-module-pygobject-devel-2.28.7-alt1.x86_64 |
altlinux-python-obsolete-buildreq-python-dev |
warn |
python-dev is obsolete according to Python Policy (http://www.altlinux.org/Python_Policy). Please, use BuildRequires: python-devel. |
|
evg |
notmuch-0.28.4-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/zsh/functions/Completion/Unix/_email-notmuch
/usr/share/zsh/functions/Completion/Unix/_notmuch |
|
evg |
notmuch-0.28.4-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/zsh/functions/Completion/Unix/_email-notmuch
/usr/share/zsh/functions/Completion/Unix/_notmuch |
|
imz |
prelink-0.4.4-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
imz |
prelink-tools-0.4.4-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
imz |
prelink-tools-debuginfo-0.4.4-alt3.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
1C_Enterprise82-monit-0.1-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
lav |
AutoScan-1.50-alt2.x86_64 |
desktop-misplaced-type-application |
fail |
/usr/share/apps/autoscan-network/AutoScan.desktop has Type=Application and should be placed under /usr/share/applications. |
|
lav |
AutoScan-1.50-alt2.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/autoscan-network.desktop: hint: value "Network;Security;System;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
 |
lav |
AutoScan-1.50-alt2.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
ElectricFence-2.2.2-alt3.qa1.x86_64 |
altlinux-policy-shared-lib-contains-devel-so |
info |
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libefence.so but just /usr/lib64/libefence.so.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/libefence.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libefence.so to \%files of ElectricFence-2.2.2-alt3.qa1.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test. |
|
lav |
ElectricFence-2.2.2-alt3.qa1.x86_64 |
library-pkgnames-static |
warn |
package contains static library which has the same name as a shared library in the repository, but neither package name ends with -devel-static according to http://altlinux.org/Drafts/SharedLibs nor the package explicitly conflicts with the package with .so library |
|
lav |
PythonCAD-0.1.36-alt2.1.qa1.1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/PythonCAD.desktop: hint: value "Office;Graphics;X-Red-Hat-Base;Engineering;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
PythonCAD-0.1.36-alt2.1.qa1.1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
PythonCAD-0.1.36-alt2.1.qa1.1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/PythonCAD-DS1_R36-py2.7.egg-info |
|
lav |
PythonCAD-0.1.36-alt2.1.qa1.1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/PythonCAD-DS1_R36-py2.7.egg-info |
|
lav |
TORCS-1.3.0-alt7.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
TORCS-1.3.0-alt7.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/TORCS.desktop: warning: key "FilePattern" in group "Desktop Entry" is deprecated
/usr/share/applications/TORCS.desktop: hint: value item "3DGraphics" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Graphics |
|
lav |
aiksaurus-gtk-1.2.1-alt4.qa4.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/gaiksaurus.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
akasha-0.5.2-alt2.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/akasha.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
apt-cacher-ng-0.8.5-alt4.1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/acng: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
arandr-0.1.10-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/zh_Hant/LC_MESSAGES/arandr.mo |
|
lav |
arandr-0.1.10-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/zh_Hant/LC_MESSAGES/arandr.mo |
|
lav |
asymptote-2.49-alt1.src |
altlinux-policy-tex-rpm-build-texmf |
warn |
According to TeX policy (http://www.altlinux.org/TeXPolicy) packages that install files to /usr/share/texmf should BuildRequires(pre): rpm-build-texmf for the dependency magic to work. |
|
lav |
azure-sdk-for-node-2.2.1-alt1.preview2017.noarch |
macos-ds-store-file-in-package |
warn |
There is a file in the package named .DS_Store or .DS_Store.gz, the file name used by Mac OS X to store folder attributes. Such files are generally useless in packages and were usually accidentally included by copying complete directories from the source tarball. |
|
lav |
beanstalkd-1.10-alt3.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
bibletime-2.11.2-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
bibletime-2.11.2-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/bibletime.desktop: hint: value item "Dictionary" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Office, or TextTools |
|
lav |
blogtk-2.0-alt1.1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/blogtk.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
blogtk-2.0-alt1.1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/blogtk.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
blogtk-2.0-alt1.1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
bro-2.6-alt1.src |
altlinux-python-obsolete-buildreq-python-dev |
warn |
python-dev is obsolete according to Python Policy (http://www.altlinux.org/Python_Policy). Please, use BuildRequires: python-devel. |
|
lav |
bro-2.6-alt1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/bro: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
cairo-clock-0.3.4-alt1.qa4.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/cairo-clock.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
cairo-clock-0.3.4-alt1.qa4.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
calibre-3.46.0-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
calibre-3.46.0-alt1.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/calibre-gui.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt).
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/calibre-ebook-edit.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
celestia-1.6.9.git-alt2.src |
beehive-log-non-strict-dependency-i586 |
info |
celestia-common: non-strict dependency on celestia-qt
celestia-common: non-strict dependency on celestia-gtk
celestia-common: non-strict dependency on celestia-glut |
|
lav |
celestia-1.6.9.git-alt2.src |
beehive-log-non-strict-dependency-x86_64 |
info |
celestia-common: non-strict dependency on celestia-qt
celestia-common: non-strict dependency on celestia-gtk
celestia-common: non-strict dependency on celestia-glut |
|
lav |
celestia-common-1.6.9.git-alt2.x86_64 |
altlinux-find-lang-mo |
warn |
Language specific files in /usr/share/locale should be marked, for example, using %find_lang. See http://www.altlinux.org/FindLangPolicy for details. |
|
lav |
celestia-common-1.6.9.git-alt2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
celestia-common-1.6.9.git-alt2.x86_64 |
freedesktop-categories |
fail |
Main Categories consist of those categories that every conforming desktop environment MUST support.(http://standards.freedesktop.org/menu-spec/latest/apa.html). None found in /usr/share/applications/celestia.desktop. please, fix. Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/celestia.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
celestia-common-1.6.9.git-alt2.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/celestia.desktop: warning: value "Celestia" for key "Comment" in group "Desktop Entry" looks redundant with value "Celestia" of key "Name" |
|
lav |
clamtk-5.27-alt1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/clamtk.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
clamtk-5.27-alt1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
clip-1.2.0cvs-alt4.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/clip/cliprc/.notrm |
|
lav |
clip-1.2.0cvs-alt4.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/libclip-codb.so
/usr/lib/libclip.so
/usr/lib64/clip/cliprc/.notrm |
|
lav |
cmdtest-0.30-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/bin/yarn conflicts with the package hadoop-yarn-2.7.6-alt3_5jpp8.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
code-1.36.0-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/code.desktop: hint: value "Utility;TextEditor;Development;IDE;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
code-1.36.0-alt1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
compat-libwxGTK3.1-gtk2-3.1.1-alt4.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
lav |
compat-libwxGTK3.1-gtk2-gl-3.1.1-alt4.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
lav |
convmv-2.05-alt1.noarch |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |
|
lav |
coriander-2.0.1-alt1.qa1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
devremover-1.0.0-alt1.noarch |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
lav |
devremover-1.0.0-alt1.noarch |
init-lsb |
fail |
/etc/rc.d/init.d/devremover: not systemd compatible: lsb init header missing and devremover.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
dia-0.97.4-alt0.7.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
dia-0.97.4-alt0.7.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/dia.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
dia-0.97.4-alt0.7.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
File /usr/bin/dia conflicts with the package tklib-0.6-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
dict-gcide-0.48-alt6.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/gcide.dictconf |
|
lav |
dict-gcide-0.48-alt6.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/gcide.dictconf |
|
lav |
dict-wn-2.0-alt4.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/wn.dictconf |
|
lav |
dict-wn-2.0-alt4.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/wn.dictconf |
|
lav |
dictd-1.12.1-alt4.1.x86_64 |
init-lsb |
warn |
/etc/rc.d/init.d/dictd: lsb init header missing. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
distcc-server-3.1-alt4.1.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
lav |
distcc-server-3.1-alt4.1.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/distccd: not systemd compatible: lsb init header missing and distccd.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
dogtail-0.9.11-alt1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/sniff.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
dotnet-common-2.1.9-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
dotnet-sdk-2.1.9-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
dpkg-1.19.6-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
drpython-3.11.4-alt1.src |
requires-ImageMagick |
info |
Dependency on ImageMagick (compat package) found. It probably should be replaced with more specific dependency like /usr/bin/convert or ImageMagick-tools, or it can be already autodetected by findreq-shell. |
|
lav |
dvorak7min-1.6.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
dvorak7min-debuginfo-1.6.1-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
efax-0.9a051015-alt3.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/fax |
|
lav |
efax-gtk-3.2.13-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/efax-gtk.desktop: hint: value item "Telephony" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Network |
|
lav |
etersoft-build-utils-2.8.10-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/rpmcs /usr/bin/rpmlog /usr/bin/rpmurl /usr/bin/rpmbsh /usr/bin/loginhsh /usr/bin/rpmgp /usr/bin/rpmunmets /usr/bin/rpmbugs /usr/bin/rpmpub |
|
lav |
far2l-2.0-alt3.89d986a.x86_64 |
symlink-extra-slash |
info |
/usr/bin/far2l:This symlink contains two successive slashes (//) or ends with a slash (/). symlinks should be as short as possible. |
|
lav |
fastonosql-1.15.0-alt2.2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
fastonosql-1.15.0-alt2.2.x86_64 |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/fastonosql.desktop: error: value "Development;IDE;redis;" for key "Categories" in group "Desktop Entry" contains an unregistered value "redis"; values extending the format should start with "X-" |
|
lav |
foldoc-20080103-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/foldoc.dictconf |
|
lav |
foldoc-20080103-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/etc/dictd/foldoc.dictconf |
|
lav |
fonts-otf-philosopher-1.000-alt2.src |
specfile-macros-post_fonts-is-deprecated |
warn |
macros %post_fonts/%postun_fonts are deprecated and will be removed. |
|
lav |
freemind-1.0.1-alt1.1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
frescobaldi-3.0.1-alt1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/frescobaldi.desktop: hint: value "Qt;AudioVideo;Music;Utility;TextEditor;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
fuse-7z-0.2nggit-alt1.src |
specfile-macros-get_dep-is-deprecated |
experimental |
Versioned Requires: foo >= %{get_dep something} using %get_dep and %get_version macros on a library are deprecated by set:versions. You probably should drop %get_dep/%get_version Requires: to avoid RPM database pollution. |
|
lav |
geda-docs-1.9.2-alt1.noarch |
rpm-obsolete-live-package |
info |
The package obsoletes the package geda-examples-1.4.2-alt1.noarch, but the package geda-examples-1.4.2-alt1.noarch is still alive and in the repository. Ask its maintainer to remove it, or, if it should not be removed, remove the Obsoletes: tag. Do not forget to add explicit conflicts with the other package if nessessary. |
|
lav |
geda-examples-1.4.2-alt1.noarch |
rpm-package-is-obsoleted |
warn |
The package is obsoleted by the package geda-docs-1.9.2-alt1.noarch, but is still alive and in the repository. Consider removing the package, or, if you want the package to be alive, ask the maintainer of geda-docs-1.9.2-alt1.noarch to remove Obsoletes: tag. |
|
lav |
geda-gattrib-1.9.2-alt1.x86_64 |
freedesktop-categories |
fail |
Main Categories consist of those categories that every conforming desktop environment MUST support.(http://standards.freedesktop.org/menu-spec/latest/apa.html). None found in /usr/share/applications/geda-gattrib.desktop. please, fix. |
|
lav |
geda-gattrib-1.9.2-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/geda-gattrib.desktop: hint: value "Engineering;Electronics;" for key "Categories" in group "Desktop Entry" does not contain a registered main category; application might only show up in a "catch-all" section of the application menu |
|
lav |
geda-gschem-1.9.2-alt1.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
geda-gschem-1.9.2-alt1.x86_64 |
freedesktop-categories |
fail |
Main Categories consist of those categories that every conforming desktop environment MUST support.(http://standards.freedesktop.org/menu-spec/latest/apa.html). None found in /usr/share/applications/geda-gschem.desktop. please, fix. |
|
lav |
geda-gschem-1.9.2-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/geda-gschem.desktop: hint: value "Engineering;Electronics;" for key "Categories" in group "Desktop Entry" does not contain a registered main category; application might only show up in a "catch-all" section of the application menu |
|
lav |
gerbv-2.6.2-alt2.src |
requires-ImageMagick |
info |
Dependency on ImageMagick (compat package) found. It probably should be replaced with more specific dependency like /usr/bin/convert or ImageMagick-tools, or it can be already autodetected by findreq-shell. |
|
lav |
gerbv-2.6.2-alt2.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
gerbv-2.6.2-alt2.x86_64 |
freedesktop-categories |
fail |
Main Categories consist of those categories that every conforming desktop environment MUST support.(http://standards.freedesktop.org/menu-spec/latest/apa.html). None found in /usr/share/applications/gerbv.desktop. please, fix. |
|
lav |
gerbv-2.6.2-alt2.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/gerbv.desktop: hint: value "Engineering;Electronics;" for key "Categories" in group "Desktop Entry" does not contain a registered main category; application might only show up in a "catch-all" section of the application menu |
|
lav |
getxbook-gui-1.2-alt3.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/getxbook.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
getxbook-gui-1.2-alt3.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gimagereader-3.3.0-alt2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/sr_Cyrl/LC_MESSAGES/gimagereader.mo
/usr/share/locale/sr_Latn/LC_MESSAGES/gimagereader.mo |
|
lav |
gimagereader-3.3.0-alt2.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/sr_Cyrl/LC_MESSAGES/gimagereader.mo
/usr/share/locale/sr_Latn/LC_MESSAGES/gimagereader.mo |
|
lav |
giter-1.15-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/gremote /usr/bin/giter-sh-functions |
|
lav |
gjots2-2.3.15-alt1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/gjots2.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
gjots2-2.3.15-alt1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
glabels-3.4.1-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
glabels-3.4.1-alt1.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
glabels-3.4.1-alt1.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/glabels-3.0.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
glusterfs3-3.12.15-alt3.x86_64 |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |
|
lav |
glusterfs3-server-3.12.15-alt3.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/glusterd |
|
lav |
glusterfs6-6.3-alt5.x86_64 |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |
|
lav |
glusterfs6-client-6.3-alt5.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /sbin/mount.glusterfs |
|
lav |
glusterfs6-server-6.3-alt5.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /etc/rc.d/init.d/glusterd |
|
lav |
glusterfs6-thin-arbiter-6.3-alt5.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
gnochm-0.9.11-alt1.2.qa1.1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gnofract4d-4.0.1-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/gnofract4d.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK
/usr/share/applications/gnofract4d.desktop: hint: value "GNOME;Graphics;Education;Science;Math;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu
/usr/share/applications/gnofract4d.desktop: hint: value "GNOME;Graphics;Education;Science;Math;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
gnome-activity-journal-0.8.0-alt1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/gnome-activity-journal.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
gnome-mastermind-0.3.1-alt1.qa1.x86_64 |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/gnome-mastermind.desktop: error: value "True" for boolean key "StartupNotify" in group "Desktop Entry" contains invalid characters, boolean values must be "false" or "true" |
|
lav |
gnome-peercast-0.5.4-alt3.qa3.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/gnome-peercast.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
gnome-peercast-0.5.4-alt3.qa3.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gnormalize-0.63-alt1.qa1.noarch |
unsafe-tmp-usage-in-scripts |
fail |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/bin/gnormalize: $ grep -A5 -B5 /tmp/ /usr/bin/gnormalize if ($show_cdplayer_skin and defined $window_cd_player){ # with skin_xTunes $widget->set_size_request (225, 90); # set a minimum size: (width,height) ; skin_xTunes #(pixmap, mask) = Gtk2::Gdk::Pixmap->create_from_xpm ($drawable, $transparent_color, $filename) #($pixmap, $pixmap_mask) = Gtk2::Gdk::Pixmap->create_from_xpm ($widget->window, undef, '/tmp/skin_xTunes.xpm'); ($pixmap, $pixmap_mask) = Gtk2::Gdk::Pixmap->create_from_xpm_d($widget->window, undef, @skin_xTunes); #my $pixmap_widget = Gtk2::Image->new_from_pixmap ($gdkpixmap, $mask); $window_cd_player->shape_combine_mask( $pixmap_mask, 0, 0 ) if not $window_cd_player->get_decorated; -- ###----------- add files to treeview --------------### sub sort_full_path_names{ my @array = @_; # For example: # $array[0] = '/tmp/teste/teste4/mus.mp3' # $array[1] = '/tmp/teste/teste2/teste4/mus.mp3' # $array[2] = '/tmp/mus.mp3' # First, sort this array in ascending order by number of '/' character. # Then, sort in case-insensitively mode. # sort case-insensitively : @articles = sort {uc($a) cmp uc($b)} @files; (see man perlfunc) # multiple comparisons in the routine and separate them with ||. # See Perl Cookbook, 2nd Edition. Chap. 4.16; 10.18 for help; #my $teste = '/tmp/teste/teste2/teste4/mus.mp3'; $teste =~ s/[^\/]//g; print "teste = $teste\n"; # output: teste = ///// # first compare the number of directory character '/'. sub compare_dir { (my $temp1 = $a) =~ s/[^\/]//g; # remove all character but '/' (my $temp2 = $b) =~ s/[^\/]//g; -- #This file 100% done All files 99% done # WaveGain Processing completed normally # No Title Gain adjustment or DC Offset correction required for file: # Error renaming '/tmp/wavegain.tmp' to '04.wav' (uh-oh) # Error processing GAIN for file - 04.wav #print "--> $_\n"; if ( $_ =~ /^\s+Applying Gain of ([-+]\d+[.,]\d+) dB to file:/ ){ $adjust = $1; } -- # leave room for WAV header (44 bytes) #seek WAV, 44, 0; #print "cdrom_rip = $cdrom_rip; value = $$addr[0]; addr = $addr; startframe = $startframe\n"; open WAV, ">/tmp/track${track}.wav" or die $!; binmode WAV; #print WAV $cdrom_rip; for (my $i=0;$i<2352;$i++){ print WAV $buf[$i]; } #syswrite(WAV, $buffer, 2352 ); |
|
lav |
gnucash-docs-3.6-alt1.noarch |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
gnunet-0.11.5-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/gnunet-bugreport /etc/rc.d/init.d/gnunetd |
|
lav |
gputils-1.3.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/man/fr/man1/gpasm.1.xz
/usr/share/man/fr/man1/gpdasm.1.xz
/usr/share/man/fr/man1/gplib.1.xz
/usr/share/man/fr/man1/gplink.1.xz
/usr/share/man/fr/man1/gpstrip.1.xz
/usr/share/man/fr/man1/gputils.1.xz
/usr/share/man/fr/man1/gpvc.1.xz
/usr/share/man/fr/man1/gpvo.1.xz |
|
lav |
gputils-1.3.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/man/fr/man1/gpasm.1.xz
/usr/share/man/fr/man1/gpdasm.1.xz
/usr/share/man/fr/man1/gplib.1.xz
/usr/share/man/fr/man1/gplink.1.xz
/usr/share/man/fr/man1/gpstrip.1.xz
/usr/share/man/fr/man1/gputils.1.xz
/usr/share/man/fr/man1/gpvc.1.xz
/usr/share/man/fr/man1/gpvo.1.xz |
|
lav |
gputils-1.3.0-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
gquilt-0.22-alt1.1.qa1.1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/gquilt.desktop: hint: value item "GNOME" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: GTK |
|
lav |
gquilt-0.22-alt1.1.qa1.1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gramps-4.2.8-alt1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/gramps.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
grdesktop-0.23-alt0.4.x86_64 |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/grdesktop.desktop: error: required key "Name" in group "Desktop Action Full" is not present |
|
lav |
grdesktop-0.23-alt0.4.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gscan2pdf-2.2.1-alt1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
gsopcast-0.4.0-alt3.qa1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
harvester-0.1-alt3.noarch |
missing-url |
info |
Missing Url: in a package. |
|
lav |
harvester-web-0.1-alt3.noarch |
missing-url |
info |
Missing Url: in a package. |
|
lav |
haspd-7.60-alt2.src |
unmet-dependency-build-missing-package |
fail |
build dependency ld-linux.so.2 not found.
build dependency libpthread.so.0 not found. |
|
lav |
i2pd-2.26.0-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
ice-3.7.1-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/share/ice/templates.xml
/share/man/man1/glacier2router.1
/share/man/man1/icebox.1
/share/man/man1/iceboxadmin.1
/share/man/man1/icebridge.1
/share/man/man1/icegridadmin.1
/share/man/man1/icegriddb.1
/share/man/man1/icegridnode.1
/share/man/man1/icegridregistry.1
/share/man/man1/icepatch2calc.1
/share/man/man1/icepatch2client.1
/share/man/man1/icepatch2server.1
/share/man/man1/icestormadmin.1
/share/man/man1/icestormdb.1
/share/man/man1/slice2cpp.1
/share/man/man1/slice2cs.1
/share/man/man1/slice2html.1
/share/man/man1/slice2java.1
/share/man/man1/slice2js.1
/share/man/man1/slice2matlab.1
/share/man/man1/slice2objc.1
/share/man/man1/slice2php.1
/share/man/man1/slice2py.1
/share/man/man1/slice2rb.1 |
|
lav |
ice-3.7.1-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/share/ice/templates.xml
/share/man/man1/glacier2router.1
/share/man/man1/icebox.1
/share/man/man1/iceboxadmin.1
/share/man/man1/icebridge.1
/share/man/man1/icegridadmin.1
/share/man/man1/icegriddb.1
/share/man/man1/icegridnode.1
/share/man/man1/icegridregistry.1
/share/man/man1/icepatch2calc.1
/share/man/man1/icepatch2client.1
/share/man/man1/icepatch2server.1
/share/man/man1/icestormadmin.1
/share/man/man1/icestormdb.1
/share/man/man1/slice2cpp.1
/share/man/man1/slice2cs.1
/share/man/man1/slice2html.1
/share/man/man1/slice2java.1
/share/man/man1/slice2js.1
/share/man/man1/slice2matlab.1
/share/man/man1/slice2objc.1
/share/man/man1/slice2php.1
/share/man/man1/slice2py.1
/share/man/man1/slice2rb.1 |
|
lav |
ice-servers-3.7.1-alt1.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
lav |
ice-servers-3.7.1-alt1.x86_64 |
init-condrestart |
warn |
/etc/rc.d/init.d/glacier2router: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/icegridnode: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway./etc/rc.d/init.d/icegridregistry: missing condstop target. Note: alt-specific script %_sbindir/preun_service (used in %preun_service macro) depends on condstop. It is wise to add condstop anyway. |
|
lav |
ice-servers-3.7.1-alt1.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/glacier2router: not systemd compatible: lsb init header missing and glacier2router.service is not present. /etc/rc.d/init.d/icegridnode: not systemd compatible: lsb init header missing and icegridnode.service is not present. /etc/rc.d/init.d/icegridregistry: not systemd compatible: lsb init header missing and icegridregistry.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
icebw-14.7-alt1.x86_64 |
altlinux-find-lang-mo |
warn |
Language specific files in /usr/share/locale should be marked, for example, using %find_lang. See http://www.altlinux.org/FindLangPolicy for details. |
|
lav |
icebw-14.7-alt1.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/i_start.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt).
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/i_admin.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
icebw-14.7-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/i_start.desktop: warning: value "Ukrainian bookkeeping suite of programs iceBw" for key "Comment" in group "Desktop Entry" looks redundant with value "Ukrainian bookkeeping suite of programs iceBw" of key "Name"
/usr/share/applications/i_start.desktop: warning: boolean key "Terminal" in group "Desktop Entry" has value "0", which is deprecated: boolean values should be "false" or "true"
desktop-file-validate utility printed the following message(s): /usr/share/applications/i_admin.desktop: warning: value "Ukrainian bookkeeping suite of programs iceBw" for key "Comment" in group "Desktop Entry" looks redundant with value "Ukrainian bookkeeping suite of programs iceBw" of key "Name"
/usr/share/applications/i_admin.desktop: warning: boolean key "Terminal" in group "Desktop Entry" has value "0", which is deprecated: boolean values should be "false" or "true" |
|
lav |
icebw-14.7-alt1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
imlib2-1.5.1-alt1.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
lav |
impose+-0.2-alt2.noarch |
unsafe-tmp-usage-in-scripts |
fail |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/bin/impose: $ grep -A5 -B5 /tmp/ /usr/bin/impose $ybot=30 unless $ybot; $pages=6 unless defined $pages; $rotdir="L" unless $rotdir; $filename = shift or do { $filename = "/tmp/$ENV{USER}-tmp.ps"; open(TMP, ">$filename"); while(<>) { print TMP; } close(TMP); $do_stdout++; $do_erase_tmp++; -- $_=; @oddbbox=split; $_=; @evenbbox=split; @oddbbox = @evenbbox unless @evenbbox; close(BB); } elsif ($lastbbox && -e "/tmp/bboxx-$ENV{USER}") { open(BB,"/tmp/bboxx-$ENV{USER}"); $_=; @oddbbox=split; $_=; @evenbbox=split; close(BB); # print "oddbbox = @oddbbox\n"; # print "evenbbox = @evenbbox\n"; -- } @evenbbox = @oddbbox if $noevenodd; # record the bboxx information open(BB, ">/tmp/bboxx-$ENV{USER}"); print BB "@oddbbox\n@evenbbox\n"; close(BB); # Do page calculations $oddwidth = $oddbbox[2]-$oddbbox[0]; |
|
lav |
inkscape-0.92.4-alt4.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
inkscape-0.92.4-alt4.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
inkscape-0.92.4-alt4.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/inkscape.desktop: hint: value item "VectorGraphics" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Graphics;2DGraphics |
|
lav |
jabber-vk4xmpp-0.20160725-alt2.noarch |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
kino-1.3.4-alt10.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
kino-1.3.4-alt10.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/Kino.desktop: warning: value "???????????? ??????" for key "Comment[el]" in group "Desktop Entry" looks redundant with value "???????????? ??????" of key "GenericName[el]" |
|
lav |
kino-1.3.4-alt10.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
korinf-2.1.12-alt1.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/korlogin |
|
lav |
lde-2.6.1-alt0.1.qa1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/menu/lde |
|
lav |
lde-2.6.1-alt0.1.qa1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/menu/lde |
|
lav |
leafpad-0.8.18.1-alt4.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
libbobpp-devel-0.2.0-alt1.1.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
File /usr/include/config.h conflicts with the package libpicosat-devel-965-alt1.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libcdf-devel-3.3.0-alt2.qa1.x86_64 |
macos-resource-fork-file-in-package |
warn |
There is a file in the package with a name starting with ._, the file name pattern used by Mac OS X to store resource forks in non-native file systems. Such files are generally useless in packages and were usually accidentally included by copying complete directories from the source tarball. |
|
lav |
libclip-1.2.0cvs-alt4.x86_64 |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
lav |
libclip-gtk2-1.2.0cvs-alt6.x86_64 |
file-in-usr-marked-as-conffile |
warn |
Files below /usr may not be marked as conffiles, since
/usr might be mounted read-only and thus, the local system
administrator would not have a chance to modify this configuration
file. |
|
lav |
libcnc-devel-1.0.100git-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libcomedi-0.11.0-alt3.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/_comedi.a
/usr/lib/python2.7/site-packages/_comedi.la |
|
lav |
libcomedi-0.11.0-alt3.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/python2.7/site-packages/_comedi.a
/usr/lib64/python2.7/site-packages/_comedi.la |
|
lav |
libcryptopp-progs-8.2.0-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libcxx-gtk-utils-devel-2.2.17-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libcxx-static-7.0.0-alt1.x86_64 |
library-pkgnames-static |
warn |
package contains static library which has the same name as a shared library in the repository, but neither package name ends with -devel-static according to http://altlinux.org/Drafts/SharedLibs nor the package explicitly conflicts with the package with .so library |
|
lav |
libcxxabi-static-7.0.0-alt1.x86_64 |
library-pkgnames-static |
warn |
package contains static library which has the same name as a shared library in the repository, but neither package name ends with -devel-static according to http://altlinux.org/Drafts/SharedLibs nor the package explicitly conflicts with the package with .so library |
|
lav |
libdbus-c++-apidocs-0.9.0-alt2.x86_64 |
arch-dep-package-consists-of-usr-share |
info |
The package consists of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libexplain-1.4-alt1.x86_64 |
altlinux-find-lang-mo |
warn |
Language specific files in /usr/share/locale should be marked, for example, using %find_lang. See http://www.altlinux.org/FindLangPolicy for details. |
|
lav |
libgc-7.6.8-alt1.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
libgeda-1.9.2-alt1.x86_64 |
big-changelog |
info |
Package contains big ChangeLog. Gzip it. |
|
lav |
libgtk+extra2-devel-docs-2.1.2-alt3.noarch |
rpm-filesystem-conflict-file-file |
warn |
There are file conflicts with the package libgtkextra-x11-devel-3.3.4-alt1_1.x86_64, for example, /usr/share/gtk-doc/html/gtkextra/GtkPlotArray.html (10 file conflicts in total). Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libjsw-1.5.6-alt1.qa1.x86_64 |
altlinux-policy-shared-lib-contains-devel-so |
info |
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libjsw.so but just /usr/lib64/libjsw.so.1.5.6. According to SharedLibs Policy Draft, symlink /usr/lib64/libjsw.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libjsw.so to \%files of libjsw-1.5.6-alt1.qa1.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test. |
|
lav |
libmodbus-3.1.4-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/libmodbus/MIGRATION
/usr/share/doc/libmodbus/README.md |
|
lav |
libmodbus-3.1.4-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/libmodbus/MIGRATION
/usr/share/doc/libmodbus/README.md |
|
lav |
libmsgpack-devel-3.2.0-alt1.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
File /usr/include/msgpack/sysdep.h conflicts with the package gem-msgpack-devel-1.2.9-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libomi-1.4.2-alt2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libpjsip-devel-2.8-alt1.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib64/libresample.so is different from the same symlink in the package libresample-devel-0.1.3-alt5.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libpx-devel-0.6.8-alt2.x86_64 |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |
|
lav |
libqof-devel-0.8.7-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libral-0.96-alt0.1.qa3.x86_64 |
altlinux-policy-shared-lib-contains-devel-so |
info |
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libral/plugins/libcsv.so but just /usr/lib64/libral/plugins/libcsv.so.0.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/libral/plugins/libcsv.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libral/plugins/libcsv.so to \%files of libral-0.96-alt0.1.qa3.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test.
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libral/plugins/librubrica.so but just /usr/lib64/libral/plugins/librubrica.so.0.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/libral/plugins/librubrica.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libral/plugins/librubrica.so to \%files of libral-0.96-alt0.1.qa3.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test.
SharedLibs Policy Draft violation: Shared Lib package should not contain symlink /usr/lib64/libral/plugins/libvcard.so but just /usr/lib64/libral/plugins/libvcard.so.0.0.0. According to SharedLibs Policy Draft, symlink /usr/lib64/libral/plugins/libvcard.so should be placed in a special subpackage named lib-devel. If you have already packaged this symlink in lib-devel, just append \%exclude /usr/lib64/libral/plugins/libvcard.so to \%files of libral-0.96-alt0.1.qa3.x86_64. Otherwise, move the symlink into the subpackage lib-devel. There is a known exception for case the .so file is not a shared lib but a plugin that is never directly linked with. Please report such a case to repocop test. |
|
lav |
librecad-2.2.0-alt0.1.rc1.x86_64 |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/librecad.desktop: error: file contains multiple keys named "Comment[ru]" in group "Desktop Entry"
/usr/share/applications/librecad.desktop: warning: value "??????? ??????????????????? ??????????????" for key "Comment[ru]" in group "Desktop Entry" looks redundant with value "??????? ??????????????????? ??????????????" of key "GenericName[ru]" |
|
lav |
libredland-1.0.17-alt3.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/redland/librdf_storage_mysql.la
/usr/lib/redland/librdf_storage_postgresql.la
/usr/lib/redland/librdf_storage_sqlite.la
/usr/lib/redland/librdf_storage_virtuoso.la |
|
lav |
libredland-1.0.17-alt3.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/redland/librdf_storage_mysql.la
/usr/lib64/redland/librdf_storage_postgresql.la
/usr/lib64/redland/librdf_storage_sqlite.la
/usr/lib64/redland/librdf_storage_virtuoso.la |
|
lav |
libsane-1.0.27-alt4.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
libshape-1.4.1-alt2.x86_64 |
rpm-filesystem-conflict-file-file |
warn |
File /usr/bin/dbfdump conflicts with the package perl-DBD-XBase-1.08-alt2.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libsoundtouch-2.1.2-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/soundtouch/COPYING.TXT
/usr/share/doc/soundtouch/README.html |
|
lav |
libsoundtouch-2.1.2-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/doc/soundtouch/COPYING.TXT
/usr/share/doc/soundtouch/README.html |
|
lav |
libtorgdev-3.5-alt2.qa1.x86_64 |
altlinux-find-lang-mo |
warn |
Language specific files in /usr/share/locale should be marked, for example, using %find_lang. See http://www.altlinux.org/FindLangPolicy for details. |
|
lav |
liburiparser-0.9.3-alt2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/cmake/uriparser-0.9.3/uriparser-config-version.cmake
/usr/lib/cmake/uriparser-0.9.3/uriparser-config.cmake
/usr/lib/cmake/uriparser-0.9.3/uriparser-noconfig.cmake
/usr/lib/cmake/uriparser-0.9.3/uriparser.cmake |
|
lav |
liburiparser-0.9.3-alt2.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/cmake/uriparser-0.9.3/uriparser-config-version.cmake
/usr/lib64/cmake/uriparser-0.9.3/uriparser-config.cmake
/usr/lib64/cmake/uriparser-0.9.3/uriparser-noconfig.cmake
/usr/lib64/cmake/uriparser-0.9.3/uriparser.cmake |
|
lav |
libwine-4.13.1-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
libwxBase3.1-devel-debuginfo-3.1.1-alt4.x86_64 |
rpm-filesystem-conflict-symlink-symlink |
warn |
value of symlink /usr/lib/debug/usr/bin/wxrc.debug is different from the same symlink in the package libwxGTK-devel-debuginfo-2.8.12-alt1.svn20131012.5.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives.
value of symlink /usr/lib/debug/usr/bin/wxrc.debug is different from the same symlink in the package libwxBase3.0-devel-debuginfo-3.0.4-alt5.x86_64. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
libxerces-c28-2.8.0-alt3.qa5.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/libxerces-c28/samples/CreateDOMDocument/CreateDOMDocument.cpp
/usr/share/libxerces-c28/samples/CreateDOMDocument/Makefile
/usr/share/libxerces-c28/samples/CreateDOMDocument/Makefile.in
/usr/share/libxerces-c28/samples/DOMCount/DOMCount.cpp
/usr/share/libxerces-c28/samples/DOMCount/DOMCount.hpp
/usr/share/libxerces-c28/samples/DOMCount/Makefile
/usr/share/libxerces-c28/samples/DOMCount/Makefile.in
/usr/share/libxerces-c28/samples/DOMPrint/DOMPrint.cpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMPrintErrorHandler.cpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMPrintErrorHandler.hpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMPrintFilter.cpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMPrintFilter.hpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMTreeErrorReporter.cpp
/usr/share/libxerces-c28/samples/DOMPrint/DOMTreeErrorReporter.hpp
/usr/share/libxerces-c28/samples/DOMPrint/Makefile
/usr/share/libxerces-c28/samples/DOMPrint/Makefile.in
/usr/share/libxerces-c28/samples/EnumVal/EnumVal.cpp
/usr/share/libxerces-c28/samples/EnumVal/Makefile
/usr/share/libxerces-c28/samples/EnumVal/Makefile.in
/usr/share/libxerces-c28/samples/Makefile
/usr/share/libxerces-c28/samples/Makefile.in
/usr/share/libxerces-c28/samples/Makefile.incl
/usr/share/libxerces-c28/samples/MemParse/Makefile
/usr/share/libxerces-c28/samples/MemParse/Makefile.in
/usr/share/libxerces-c28/samples/MemParse/MemParse.cpp
/usr/share/libxerces-c28/samples/MemParse/MemParse.hpp
/usr/share/libxerces-c28/samples/MemParse/MemParseHandlers.cpp
/usr/share/libxerces-c28/samples/MemParse/MemParseHandlers.hpp
/usr/share/libxerces-c28/samples/PParse/Makefile
/usr/share/libxerces-c28/samples/PParse/Makefile.in
/usr/share/libxerces-c28/samples/PParse/PParse.cpp
/usr/share/libxerces-c28/samples/PParse/PParse.hpp
/usr/share/libxerces-c28/samples/PParse/PParseHandlers.cpp
/usr/share/libxerces-c28/samples/PParse/PParseHandlers.hpp
/usr/share/libxerces-c28/samples/PSVIWriter/Makefile
/usr/share/libxerces-c28/samples/PSVIWriter/Makefile.in
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIUni.cpp
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIUni.hpp
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIWriter.cpp
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIWriter.hpp
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIWriterHandlers.cpp
/usr/share/libxerces-c28/samples/PSVIWriter/PSVIWriterHandlers.hpp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/CreateDOMDocument/CreateDOMDocument.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/CreateDOMDocument/CreateDOMDocument.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/DOMCount/DOMCount.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/DOMCount/DOMCount.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/DOMPrint/DOMPrint.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/DOMPrint/DOMPrint.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/EnumVal/EnumVal.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/EnumVal/EnumVal.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/MemParse/MemParse.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/MemParse/MemParse.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/PParse/PParse.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/PParse/PParse.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/PSVIWriter/PSVIWriter.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/PSVIWriter/PSVIWriter.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/Redirect/Redirect.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/Redirect/Redirect.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAX2Count/SAX2Count.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAX2Count/SAX2Count.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAX2Print/SAX2Print.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAX2Print/SAX2Print.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAXCount/SAXCount.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAXCount/SAXCount.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAXPrint/SAXPrint.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SAXPrint/SAXPrint.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SCMPrint/SCMPrint.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SCMPrint/SCMPrint.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SEnumVal/SEnumVal.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/SEnumVal/SEnumVal.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/StdInParse/StdInParse.dsp
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/StdInParse/StdInParse.mak
/usr/share/libxerces-c28/samples/Projects/Win32/VC6/samples.dsw
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/CreateDOMDocument/CreateDOMDocument.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/DOMCount/DOMCount.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/DOMPrint/DOMPrint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/EnumVal/EnumVal.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/MemParse/MemParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/PParse/PParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/PSVIWriter/PSVIWriter.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/Redirect/Redirect.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SAX2Count/SAX2Count.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SAX2Print/SAX2Print.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SAXCount/SAXCount.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SAXPrint/SAXPrint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SCMPrint/scmprint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/SEnumVal/SEnumVal.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/StdInParse/StdInParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7.1/samples.sln
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/CreateDOMDocument/CreateDOMDocument.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/DOMCount/DOMCount.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/DOMPrint/DOMPrint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/EnumVal/EnumVal.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/MemParse/MemParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/PParse/PParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/PSVIWriter/PSVIWriter.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/Redirect/Redirect.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SAX2Count/SAX2Count.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SAX2Print/SAX2Print.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SAXCount/SAXCount.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SAXPrint/SAXPrint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SCMPrint/scmprint.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/SEnumVal/SEnumVal.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/StdInParse/StdInParse.vcproj
/usr/share/libxerces-c28/samples/Projects/Win32/VC7/samples.sln
/usr/share/libxerces-c28/samples/Redirect/Makefile
/usr/share/libxerces-c28/samples/Redirect/Makefile.in
/usr/share/libxerces-c28/samples/Redirect/Redirect.cpp
/usr/share/libxerces-c28/samples/Redirect/Redirect.hpp
/usr/share/libxerces-c28/samples/Redirect/RedirectHandlers.cpp
/usr/share/libxerces-c28/samples/Redirect/RedirectHandlers.hpp
/usr/share/libxerces-c28/samples/SAX2Count/Makefile
/usr/share/libxerces-c28/samples/SAX2Count/Makefile.in
/usr/share/libxerces-c28/samples/SAX2Count/SAX2Count.cpp
/usr/share/libxerces-c28/samples/SAX2Count/SAX2Count.hpp
/usr/share/libxerces-c28/samples/SAX2Count/SAX2CountHandlers.cpp
/usr/share/libxerces-c28/samples/SAX2Count/SAX2CountHandlers.hpp
/usr/share/libxerces-c28/samples/SAX2Print/Makefile
/usr/share/libxerces-c28/samples/SAX2Print/Makefile.in
/usr/share/libxerces-c28/samples/SAX2Print/SAX2FilterHandlers.cpp
/usr/share/libxerces-c28/samples/SAX2Print/SAX2FilterHandlers.hpp
/usr/share/libxerces-c28/samples/SAX2Print/SAX2Print.cpp
/usr/share/libxerces-c28/samples/SAX2Print/SAX2Print.hpp
/usr/share/libxerces-c28/samples/SAX2Print/SAX2PrintHandlers.cpp
/usr/share/libxerces-c28/samples/SAX2Print/SAX2PrintHandlers.hpp
/usr/share/libxerces-c28/samples/SAXCount/Makefile
/usr/share/libxerces-c28/samples/SAXCount/Makefile.in
/usr/share/libxerces-c28/samples/SAXCount/SAXCount.cpp
/usr/share/libxerces-c28/samples/SAXCount/SAXCount.hpp
/usr/share/libxerces-c28/samples/SAXCount/SAXCountHandlers.cpp
/usr/share/libxerces-c28/samples/SAXCount/SAXCountHandlers.hpp
/usr/share/libxerces-c28/samples/SAXPrint/Makefile
/usr/share/libxerces-c28/samples/SAXPrint/Makefile.in
/usr/share/libxerces-c28/samples/SAXPrint/SAXPrint.cpp
/usr/share/libxerces-c28/samples/SAXPrint/SAXPrint.hpp
/usr/share/libxerces-c28/samples/SAXPrint/SAXPrintHandlers.cpp
/usr/share/libxerces-c28/samples/SAXPrint/SAXPrintHandlers.hpp
/usr/share/libxerces-c28/samples/SCMPrint/Makefile
/usr/share/libxerces-c28/samples/SCMPrint/Makefile.in
/usr/share/libxerces-c28/samples/SCMPrint/SCMPrint.cpp
/usr/share/libxerces-c28/samples/SEnumVal/Makefile
/usr/share/libxerces-c28/samples/SEnumVal/Makefile.in
/usr/share/libxerces-c28/samples/SEnumVal/SEnumVal.cpp
/usr/share/libxerces-c28/samples/StdInParse/Makefile
/usr/share/libxerces-c28/samples/StdInParse/Makefile.in
/usr/share/libxerces-c28/samples/StdInParse/StdInParse.cpp
/usr/share/libxerces-c28/samples/StdInParse/StdInParse.hpp
/usr/share/libxerces-c28/samples/StdInParse/StdInParseHandlers.cpp
/usr/share/libxerces-c28/samples/StdInParse/StdInParseHandlers.hpp
/usr/share/libxerces-c28/samples/autom4te.cache/output.0
/usr/share/libxerces-c28/samples/autom4te.cache/output.1
/usr/share/libxerces-c28/samples/autom4te.cache/requests
/usr/share/libxerces-c28/samples/autom4te.cache/traces.0
/usr/share/libxerces-c28/samples/autom4te.cache/traces.1
/usr/share/libxerces-c28/samples/config.guess
/usr/share/libxerces-c28/samples/config.h.in
/usr/share/libxerces-c28/samples/config.log
/usr/share/libxerces-c28/samples/config.status
/usr/share/libxerces-c28/samples/config.sub
/usr/share/libxerces-c28/samples/configure
/usr/share/libxerces-c28/samples/configure.in
/usr/share/libxerces-c28/samples/data/personal-schema.xml
/usr/share/libxerces-c28/samples/data/personal.dtd
/usr/share/libxerces-c28/samples/data/personal.xml
/usr/share/libxerces-c28/samples/data/personal.xsd
/usr/share/libxerces-c28/samples/data/redirect.dtd
/usr/share/libxerces-c28/samples/install-sh
/usr/share/libxerces-c28/samples/runConfigure |
|
lav |
lightlang-0.8.6.s-alt1.qa2.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
logjam-4.6.2-alt1.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
magic-wormhole-0.11.2-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/wormhole-server |
|
lav |
magic-wormhole-0.11.2-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/wormhole-server |
|
lav |
matrix-synapse-1.0.0-alt1.noarch |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
matrix-synapse-1.0.0-alt1.noarch |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
megasync-4.0.2.0-alt1.x86_64 |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/megasync.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
megasync-4.0.2.0-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/megasync.desktop: hint: value "Network;System;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
memoranda-1.0-alt0.1rc3.1.qa2.x86_64 |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/memoranda.desktop: warning: key "Encoding" in group "Desktop Entry" is deprecated
/usr/share/applications/memoranda.desktop: error: (will be fatal in the future): value "taskmanagement_section.png" for key "Icon" in group "Desktop Entry" is an icon name with an extension, but there should be no extension as described in the Icon Theme Specification if the value is not an absolute path
/usr/share/applications/memoranda.desktop: hint: value "GNOME;GTK;Office;Development;ProjectManagement;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
mk-configure-0.31.0-alt1.noarch |
bin-permissions |
info |
not executable file /usr/bin/mkc_check_common.sh |
|
lav |
moneymanagerex-1.3.3-alt2.1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
mtop-0.6.6-alt2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/perl5/cpan2spec.pl |
|
lav |
mtop-0.6.6-alt2.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/perl5/cpan2spec.pl |
|
lav |
musescore-3.2.3-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
mysql-utilities-1.6.5-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/bin/mysqldiff conflicts with the package mysqldiff-0.60-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
mysqldiff-0.60-alt1.noarch |
rpm-filesystem-conflict-file-file |
warn |
File /usr/bin/mysqldiff conflicts with the package mysql-utilities-1.6.5-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
nagios-plugins-rdiff-backup-0.3-alt1.noarch |
missing-url |
info |
Missing Url: in a package. |
|
lav |
netdata-1.16.0-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
netdata-1.16.0-alt1.x86_64 |
unsafe-tmp-usage-in-scripts |
fail |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/lib/netdata/plugins.d/anonymous-statistics.sh: $ grep -A5 -B5 /tmp/ /usr/lib/netdata/plugins.d/anonymous-statistics.sh &cd8=${NETDATA_SYSTEM_KERNEL_VERSION}\ &cd9=${NETDATA_SYSTEM_ARCHITECTURE}\ &cd10=${NETDATA_SYSTEM_VIRTUALIZATION}\ &cd11=${NETDATA_SYSTEM_VIRT_DETECTION}\ &cd12=${NETDATA_SYSTEM_CONTAINER}\ &cd13=${NETDATA_SYSTEM_CONTAINER_DETECTION}" >> /tmp/as.log # ------------------------------------------------------------------------------------------------- # send the anonymous statistics to GA # https://developers.google.com/analytics/devguides/collection/protocol/v1/parameters if [ -n "$(command -v curl 2>/dev/null)" ]; then Found error in /usr/lib/netdata/plugins.d/health-cmdapi-test.sh: $ grep -A5 -B5 /tmp/ /usr/lib/netdata/plugins.d/health-cmdapi-test.sh d['alarms']['system.cpu.10min_cpu_iowait']['silenced'], \ d['alarms']['system.load.load_trigger']['disabled'], \ d['alarms']['system.load.load_trigger']['silenced'], \ );" 2>&1) if [ $? -ne 0 ] ; then echo -e " ${RED}ERROR: Unexpected response stored in /tmp/resp-$number.json" echo "$resp" > /tmp/resp-$number.json err=$((err+1)) iter=0 elif [ "${r}" != "${2}" ] ; then echo -e " ${GRAY}WARNING: 'Got ${r}'. Expected '${2}'" iter=$((iter+1)) |
|
lav |
nfs-ganesha-2.7.3-alt1.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
nfs-ganesha-2.7.3-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
nicotine-plus-1.4.1-alt1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/nicotine.desktop: hint: value item "FileTransfer" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Network
/usr/share/applications/nicotine.desktop: hint: value item "P2P" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Network |
|
lav |
node-10.16.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/rpm/nodejs_native.req |
|
lav |
node-10.16.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/rpm/nodejs_native.req |
|
lav |
nosync-0.1-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
notemeister-0.1.7-alt7.qa5.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/notemeister/Configurator.pyo
/usr/lib/python2.7/site-packages/notemeister/Dialogs.pyo
/usr/lib/python2.7/site-packages/notemeister/NewNoteDlg.pyo
/usr/lib/python2.7/site-packages/notemeister/Note.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteBuffer.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteTree.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteView.pyo
/usr/lib/python2.7/site-packages/notemeister/Stock.pyo
/usr/lib/python2.7/site-packages/notemeister/TimedStatusbar.pyo
/usr/lib/python2.7/site-packages/notemeister/TitleBuffer.pyo
/usr/lib/python2.7/site-packages/notemeister/__init__.pyo
/usr/lib/python2.7/site-packages/notemeister/const.pyo
/usr/lib/python2.7/site-packages/notemeister/notemeister_main.pyo
/usr/lib/python2.7/site-packages/notemeister/utils.pyo |
|
lav |
notemeister-0.1.7-alt7.qa5.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/notemeister/Configurator.pyo
/usr/lib/python2.7/site-packages/notemeister/Dialogs.pyo
/usr/lib/python2.7/site-packages/notemeister/NewNoteDlg.pyo
/usr/lib/python2.7/site-packages/notemeister/Note.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteBuffer.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteTree.pyo
/usr/lib/python2.7/site-packages/notemeister/NoteView.pyo
/usr/lib/python2.7/site-packages/notemeister/Stock.pyo
/usr/lib/python2.7/site-packages/notemeister/TimedStatusbar.pyo
/usr/lib/python2.7/site-packages/notemeister/TitleBuffer.pyo
/usr/lib/python2.7/site-packages/notemeister/__init__.pyo
/usr/lib/python2.7/site-packages/notemeister/const.pyo
/usr/lib/python2.7/site-packages/notemeister/notemeister_main.pyo
/usr/lib/python2.7/site-packages/notemeister/utils.pyo |
|
lav |
nted-1.10.18-alt4.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
nted-1.10.18-alt4.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/nted.desktop: warning: value "" for key "Comment[ar]" in group "Desktop Entry" looks redundant with value "" of key "Name[ar]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[az]" in group "Desktop Entry" looks redundant with value "" of key "Name[az]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[be]" in group "Desktop Entry" looks redundant with value "" of key "Name[be]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[bg]" in group "Desktop Entry" looks redundant with value "" of key "Name[bg]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[bn]" in group "Desktop Entry" looks redundant with value "" of key "Name[bn]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[bs]" in group "Desktop Entry" looks redundant with value "" of key "Name[bs]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ca]" in group "Desktop Entry" looks redundant with value "" of key "Name[ca]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[cs]" in group "Desktop Entry" looks redundant with value "" of key "Name[cs]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[cy]" in group "Desktop Entry" looks redundant with value "" of key "Name[cy]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[da]" in group "Desktop Entry" looks redundant with value "" of key "Name[da]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[el]" in group "Desktop Entry" looks redundant with value "" of key "Name[el]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[et]" in group "Desktop Entry" looks redundant with value "" of key "Name[et]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[eu]" in group "Desktop Entry" looks redundant with value "" of key "Name[eu]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[fa]" in group "Desktop Entry" looks redundant with value "" of key "Name[fa]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[fi]" in group "Desktop Entry" looks redundant with value "" of key "Name[fi]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[gl]" in group "Desktop Entry" looks redundant with value "" of key "Name[gl]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[gu]" in group "Desktop Entry" looks redundant with value "" of key "Name[gu]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[he]" in group "Desktop Entry" looks redundant with value "" of key "Name[he]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[hi]" in group "Desktop Entry" looks redundant with value "" of key "Name[hi]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[hr]" in group "Desktop Entry" looks redundant with value "" of key "Name[hr]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[hu]" in group "Desktop Entry" looks redundant with value "" of key "Name[hu]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[id]" in group "Desktop Entry" looks redundant with value "" of key "Name[id]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ja]" in group "Desktop Entry" looks redundant with value "" of key "Name[ja]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ko]" in group "Desktop Entry" looks redundant with value "" of key "Name[ko]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[lt]" in group "Desktop Entry" looks redundant with value "" of key "Name[lt]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[lv]" in group "Desktop Entry" looks redundant with value "" of key "Name[lv]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[mk]" in group "Desktop Entry" looks redundant with value "" of key "Name[mk]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[mn]" in group "Desktop Entry" looks redundant with value "" of key "Name[mn]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ms]" in group "Desktop Entry" looks redundant with value "" of key "Name[ms]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[nb]" in group "Desktop Entry" looks redundant with value "" of key "Name[nb]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ne]" in group "Desktop Entry" looks redundant with value "" of key "Name[ne]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[nl]" in group "Desktop Entry" looks redundant with value "" of key "Name[nl]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[nn]" in group "Desktop Entry" looks redundant with value "" of key "Name[nn]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[no]" in group "Desktop Entry" looks redundant with value "" of key "Name[no]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[pa]" in group "Desktop Entry" looks redundant with value "" of key "Name[pa]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[pl]" in group "Desktop Entry" looks redundant with value "" of key "Name[pl]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[pt]" in group "Desktop Entry" looks redundant with value "" of key "Name[pt]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[pt_BR]" in group "Desktop Entry" looks redundant with value "" of key "Name[pt_BR]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ro]" in group "Desktop Entry" looks redundant with value "" of key "Name[ro]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ru]" in group "Desktop Entry" looks redundant with value "" of key "Name[ru]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sk]" in group "Desktop Entry" looks redundant with value "" of key "Name[sk]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sl]" in group "Desktop Entry" looks redundant with value "" of key "Name[sl]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sq]" in group "Desktop Entry" looks redundant with value "" of key "Name[sq]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sr]" in group "Desktop Entry" looks redundant with value "" of key "Name[sr]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sr@Latn]" in group "Desktop Entry" looks redundant with value "" of key "Name[sr@Latn]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[sv]" in group "Desktop Entry" looks redundant with value "" of key "Name[sv]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[ta]" in group "Desktop Entry" looks redundant with value "" of key "Name[ta]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[th]" in group "Desktop Entry" looks redundant with value "" of key "Name[th]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[tr]" in group "Desktop Entry" looks redundant with value "" of key "Name[tr]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[uk]" in group "Desktop Entry" looks redundant with value "" of key "Name[uk]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[vi]" in group "Desktop Entry" looks redundant with value "" of key "Name[vi]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[wa]" in group "Desktop Entry" looks redundant with value "" of key "Name[wa]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[xh]" in group "Desktop Entry" looks redundant with value "" of key "Name[xh]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[zh_CN]" in group "Desktop Entry" looks redundant with value "" of key "Name[zh_CN]"
/usr/share/applications/nted.desktop: warning: value "" for key "Comment[zh_TW]" in group "Desktop Entry" looks redundant with value "" of key "Name[zh_TW]" |
|
lav |
nted-1.10.18-alt4.x86_64 |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
ocl-icd-2.2.12-alt1.x86_64 |
library-pkgnames |
info |
package contains public library which is used in external packages: name should be lib* according to http://altlinux.org/Drafts/SharedLibs |
|
lav |
ooopy-1.4.4873-alt1.1.1.noarch |
bin-permissions |
info |
not executable file /usr/bin/ooopy |
|
lav |
ooopy-1.4.4873-alt1.1.1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/OOoPy-1.4.4873-py2.7.egg-info |
|
lav |
ooopy-1.4.4873-alt1.1.1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/OOoPy-1.4.4873-py2.7.egg-info |
|
lav |
opendkim-2.11.0-alt1.x86_64 |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/sbin/opendkim-reportstats |
|
lav |
opendkim-2.11.0-alt1.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
opendkim-2.11.0-alt1.x86_64 |
systemd-but-no-native-init |
warn |
The package have native systemd file(s) but no SysV init scripts. |
|
lav |
openerp-client-7.0-alt1.r2102.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/openerp-client.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
openerp-client-7.0-alt1.r2102.noarch |
freedesktop-desktop |
warn |
desktop-file-validate utility exited abnormally with the following message(s): /usr/share/applications/openerp-client.desktop: error: file contains multiple keys named "Comment" in group "Desktop Entry" |
|
lav |
openerp-client-7.0-alt1.r2102.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
openvz-etersoft-0.2-alt2.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
oregano-0.84.41-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
oregano-0.84.41-alt1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/oregano.desktop: hint: value "GTK;Science;Education;Physics;" for key "Categories" in group "Desktop Entry" contains more than one main category; application might appear more than once in the application menu |
|
lav |
oregano-0.84.41-alt1.x86_64 |
uncompressed-manpages |
info |
Package contains uncompressed manual pages. |
|
lav |
orthcal-1.4-alt1.noarch |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/extras-orthcal.desktop: warning: key "OnlyShowIn" in group "Desktop Action Julian" is deprecated
/usr/share/applications/extras-orthcal.desktop: warning: key "OnlyShowIn" in group "Desktop Action RJulian" is deprecated
/usr/share/applications/extras-orthcal.desktop: warning: key "OnlyShowIn" in group "Desktop Action Options" is deprecated
/usr/share/applications/extras-orthcal.desktop: warning: key "OnlyShowIn" in group "Desktop Action About" is deprecated |
|
lav |
otl-0.54-alt1.qa1.x86_64 |
unsafe-tmp-usage-in-scripts |
fail |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/bin/otl: $ grep -A5 -B5 /tmp/ /usr/bin/otl #### # # need to rewrite and reread file so that \n's are now processed correctly # and each line ends up as a separate array element # -- write it to temp file open(FOUT, ">/tmp/tmp.otl"); flock(FOUT,2); print FOUT @linesout; close (FOUT); # now read it @linesout=(); open(INFO,"/tmp/tmp.otl"); @linesout=; close(INFO); $lineslength=@linesout; if ($debug) Found error in /usr/bin/otlsub: $ grep -A5 -B5 /tmp/ /usr/bin/otlsub ################################### # need to rewrite and reread file so that \n's are now processed correctly # and each line ends up as a separate array element # -- write it to temp file unlink("/tmp/tmp.otl"); open(FOUT, ">/tmp/tmp.otl"); flock(FOUT,2); print FOUT @linesout; close (FOUT); # now read it @linesout=(); open(INFO,"/tmp/tmp.otl"); @linesout=; close(INFO); # # $llength is length of linesout |
|
lav |
outwiker-1.9.0.790-alt1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/outwiker.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
packpack-1.0-alt2.noarch |
checkbashisms |
experimental |
checkbashisms utility found possible bashisms in: /usr/bin/packpack |
|
lav |
papi-doc-5.7.0-alt1.x86_64 |
arch-dep-package-consists-of-usr-share |
info |
The package consists of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
pdfsam-2.2.4e-alt1.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
pear-Date-1.5.0a4-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/buildPackageXML.php |
|
lav |
pear-Date-1.5.0a4-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/buildPackageXML.php |
|
lav |
pear-File_CSV-1.0.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/docs/File_CSV/FILE_CSV_LICENSE |
|
lav |
pear-File_CSV-1.0.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/docs/File_CSV/FILE_CSV_LICENSE |
|
lav |
pear-HTML_Table_Matrix-1.0.10-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/examples/HTML_Table_Matrix_example.php |
|
lav |
pear-HTML_Table_Matrix-1.0.10-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/examples/HTML_Table_Matrix_example.php |
|
lav |
pear-HTML_Template_Flexy-1.3.13-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/docs/HTML_Template_Flexy/HTML/Template/Flexy/templates/translator.html
/usr/share/php/pear/docs/HTML_Template_Flexy/examples/EMPTY_FOLDERS_NOTHING_IN_HERE |
|
lav |
pear-HTML_Template_Flexy-1.3.13-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/docs/HTML_Template_Flexy/HTML/Template/Flexy/templates/translator.html
/usr/share/php/pear/docs/HTML_Template_Flexy/examples/EMPTY_FOLDERS_NOTHING_IN_HERE |
|
lav |
pear-Image_Canvas-0.3.5-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/data/Image_Canvas/Image/Canvas/Fonts/README
/usr/share/php/pear/data/Image_Canvas/Image/Canvas/Fonts/fontmap.txt
/usr/share/php/pear/data/Image_Canvas/README |
|
lav |
pear-Image_Canvas-0.3.5-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/data/Image_Canvas/Image/Canvas/Fonts/README
/usr/share/php/pear/data/Image_Canvas/Image/Canvas/Fonts/fontmap.txt
/usr/share/php/pear/data/Image_Canvas/README |
|
lav |
pear-Image_Graph-0.8.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/data/Image_Graph/.project
/usr/share/php/pear/data/Image_Graph/gendocHTML.sh
/usr/share/php/pear/data/Image_Graph/gendocPeardoc2.sh |
|
lav |
pear-Image_Graph-0.8.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/data/Image_Graph/.project
/usr/share/php/pear/data/Image_Graph/gendocHTML.sh
/usr/share/php/pear/data/Image_Graph/gendocPeardoc2.sh |
|
lav |
pear-Math_Matrix-0.8.7-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/tests/examples/data.mat |
|
lav |
pear-Math_Matrix-0.8.7-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/tests/examples/data.mat |
|
lav |
pear-XML_Feed_Parser-1.0.2-alt3.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/XML/Feed/tests/convert-tests.php |
|
lav |
pear-XML_Feed_Parser-1.0.2-alt3.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/XML/Feed/tests/convert-tests.php |
|
lav |
pear-XML_Serializer-0.21.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ArraysTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ObjectsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_AttributesContentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_CDataSectionsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ClassNameTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_CommentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_DefaultTagTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_DocTypeTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_EncodeFuncTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_IgnoreNullTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_IndentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_LinebreaksTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ModeTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_NamespaceTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ReturnResultTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_RootAttributesTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_RootNameTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_TagMapTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_TypeHintsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_XmlDeclarationTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ScalarsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ArraysTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ObjectsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_EncodingsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_GuessTypesTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_WhitespaceTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ScalarsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/bug-12139.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-13896.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-15602.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-9799.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/req-13564.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/show_ScalarAsAttributes_usage.phpt |
|
lav |
pear-XML_Serializer-0.21.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ArraysTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ObjectsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_AttributesContentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_CDataSectionsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ClassNameTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_CommentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_DefaultTagTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_DocTypeTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_EncodeFuncTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_IgnoreNullTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_IndentTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_LinebreaksTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ModeTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_NamespaceTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_ReturnResultTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_RootAttributesTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_RootNameTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_TagMapTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_TypeHintsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_Option_XmlDeclarationTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Serializer_ScalarsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ArraysTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ObjectsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_EncodingsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_GuessTypesTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_Option_WhitespaceTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/Unserializer_ScalarsTest.php
/usr/share/php/pear/tests/XML_Serializer/tests/bug-12139.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-13896.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-15602.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/bug-9799.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/req-13564.phpt
/usr/share/php/pear/tests/XML_Serializer/tests/show_ScalarAsAttributes_usage.phpt |
|
lav |
pear-XML_image2svg-0.1.1-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/package.php |
|
lav |
pear-XML_image2svg-0.1.1-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/php/pear/package.php |
|
lav |
pgmodeler-0.9.1-alt1.x86_64 |
arch-dep-package-has-big-usr-share |
info |
The package has a significant amount of architecture-independent data in /usr/share, while it is an architecture-dependent package. This is wasteful of mirror space and bandwidth, as we then end up with multiple copies of this data, one for each architecture. If the data in /usr/share is not architecture-independent, it is a policy violation, and in this case, you should move that data elsewhere. |
|
lav |
php7-xdebug-7.2.21-alt1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
php7-xdebug-debuginfo-7.2.21-alt1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
php7-xsl-7.2.21-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
php7-xsl-debuginfo-7.2.21-alt1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
php7-zip-7.2.21-alt1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
php7-zip-debuginfo-7.2.21-alt1.1.x86_64 |
missing-url |
info |
Missing Url: in a package. |
|
lav |
pybookreader-0.5.0-alt6.1.qa2.1.1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python2.7/site-packages/ornamentbook/__init__.pyo
/usr/lib/python2.7/site-packages/ornamentbook/config.pyo
/usr/lib/python2.7/site-packages/ornamentbook/detectcharset.pyo
/usr/lib/python2.7/site-packages/ornamentbook/fb2parser.pyo
/usr/lib/python2.7/site-packages/ornamentbook/hyphenation.pyo
/usr/lib/python2.7/site-packages/ornamentbook/main.pyo
/usr/lib/python2.7/site-packages/ornamentbook/miscutils.pyo
/usr/lib/python2.7/site-packages/ornamentbook/ornamentbook.pyo
/usr/lib/python2.7/site-packages/ornamentbook/properties.pyo
/usr/lib/python2.7/site-packages/ornamentbook/textparagraph.pyo
/usr/lib/python2.7/site-packages/pybookreader/__init__.pyo
/usr/lib/python2.7/site-packages/pybookreader/bookbuffer.pyo
/usr/lib/python2.7/site-packages/pybookreader/bookinfowindow.pyo
/usr/lib/python2.7/site-packages/pybookreader/bookmarks.pyo
/usr/lib/python2.7/site-packages/pybookreader/bookmarkswindow.pyo
/usr/lib/python2.7/site-packages/pybookreader/config.pyo
/usr/lib/python2.7/site-packages/pybookreader/detectcharset.pyo
/usr/lib/python2.7/site-packages/pybookreader/dictclient/__init__.pyo
/usr/lib/python2.7/site-packages/pybookreader/dictclient/dictclient.pyo
/usr/lib/python2.7/site-packages/pybookreader/dictclient/pygtkdict.pyo
/usr/lib/python2.7/site-packages/pybookreader/fictionbook2.pyo
/usr/lib/python2.7/site-packages/pybookreader/filters.pyo
/usr/lib/python2.7/site-packages/pybookreader/main.pyo
/usr/lib/python2.7/site-packages/pybookreader/mainwindow.pyo
/usr/lib/python2.7/site-packages/pybookreader/miscutils.pyo
/usr/lib/python2.7/site-packages/pybookreader/parsers.pyo
/usr/lib/python2.7/site-packages/pybookreader/properties.pyo
/usr/lib/python2.7/site-packages/pybookreader/propswindow.pyo
/usr/lib/python2.7/site-packages/pybookreader/recreatedb.pyo
/usr/lib/python2.7/site-packages/pybookreader/scrolledtext.pyo |
|
lav |
pybookreader-0.5.0-alt6.1.qa2.1.1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/python2.7/site-packages/ornamentbook/__init__.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/config.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/detectcharset.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/fb2parser.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/hyphenation.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/main.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/miscutils.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/ornamentbook.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/properties.pyo
/usr/lib64/python2.7/site-packages/ornamentbook/textparagraph.pyo
/usr/lib64/python2.7/site-packages/pybookreader/__init__.pyo
/usr/lib64/python2.7/site-packages/pybookreader/bookbuffer.pyo
/usr/lib64/python2.7/site-packages/pybookreader/bookinfowindow.pyo
/usr/lib64/python2.7/site-packages/pybookreader/bookmarks.pyo
/usr/lib64/python2.7/site-packages/pybookreader/bookmarkswindow.pyo
/usr/lib64/python2.7/site-packages/pybookreader/config.pyo
/usr/lib64/python2.7/site-packages/pybookreader/detectcharset.pyo
/usr/lib64/python2.7/site-packages/pybookreader/dictclient/__init__.pyo
/usr/lib64/python2.7/site-packages/pybookreader/dictclient/dictclient.pyo
/usr/lib64/python2.7/site-packages/pybookreader/dictclient/pygtkdict.pyo
/usr/lib64/python2.7/site-packages/pybookreader/fictionbook2.pyo
/usr/lib64/python2.7/site-packages/pybookreader/filters.pyo
/usr/lib64/python2.7/site-packages/pybookreader/main.pyo
/usr/lib64/python2.7/site-packages/pybookreader/mainwindow.pyo
/usr/lib64/python2.7/site-packages/pybookreader/miscutils.pyo
/usr/lib64/python2.7/site-packages/pybookreader/parsers.pyo
/usr/lib64/python2.7/site-packages/pybookreader/properties.pyo
/usr/lib64/python2.7/site-packages/pybookreader/propswindow.pyo
/usr/lib64/python2.7/site-packages/pybookreader/recreatedb.pyo
/usr/lib64/python2.7/site-packages/pybookreader/scrolledtext.pyo |
|
lav |
pybookreader-0.5.0-alt6.1.qa2.1.1.x86_64 |
freedesktop-desktop |
info |
desktop-file-validate utility printed the following message(s): /usr/share/applications/ornamentbook.desktop: hint: value item "Literature" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Education, or Science
desktop-file-validate utility printed the following message(s): /usr/share/applications/pybookreader.desktop: hint: value item "Literature" in key "Categories" in group "Desktop Entry" can be extended with another category among the following categories: Education, or Science |
|
lav |
pychess-0.12.4-alt2.noarch |
iconsdir |
experimental |
Please, move pixmaps from /usr/share/pixmaps to %_liconsdir, %_niconsdir, %_miconsdir according to their size. See http://www.altlinux.org/IconPathsPolicy. |
|
lav |
pydb-1.26-alt1.x86_64 |
symlink-extra-slash |
info |
/usr/bin/pydb:This symlink contains two successive slashes (//) or ends with a slash (/). symlinks should be as short as possible. |
|
lav |
pylog2rotate-1.1.0-alt1.2.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.opt-1.pyc
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.opt-2.pyc
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.pyc |
|
lav |
pylog2rotate-1.1.0-alt1.2.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.opt-1.pyc
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.opt-2.pyc
/usr/lib/python3/site-packages/__pycache__/log2rotate.cpython-37.pyc |
|
lav |
pystopwatch-2.0-alt1.1.1.noarch |
freedesktop-categories |
warn |
Menu-related Additional Categories (http://standards.freedesktop.org/menu-spec/latest/apa.html) not found in /usr/share/applications/pystopwatch.desktop. Please add it or report a bug against this test if you already have registered one (not including menu unrelated ones as Core or Qt). |
|
lav |
python-module-automat-0.7.0-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/automat-visualize |
|
lav |
python-module-automat-0.7.0-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/automat-visualize |
|
lav |
python-module-dabo-0.9.14-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/ar/LC_MESSAGES/dabo.po
/usr/share/locale/ca/LC_MESSAGES/dabo.po
/usr/share/locale/cs/LC_MESSAGES/dabo.po
/usr/share/locale/dabo.pot
/usr/share/locale/de/LC_MESSAGES/dabo.po
/usr/share/locale/el/LC_MESSAGES/dabo.po
/usr/share/locale/en/LC_MESSAGES/dabo.po
/usr/share/locale/en_GB/LC_MESSAGES/dabo.po
/usr/share/locale/es/LC_MESSAGES/dabo.po
/usr/share/locale/fi/LC_MESSAGES/dabo.po
/usr/share/locale/fr/LC_MESSAGES/dabo.po
/usr/share/locale/hi/LC_MESSAGES/dabo.po
/usr/share/locale/hu/LC_MESSAGES/dabo.po
/usr/share/locale/id/LC_MESSAGES/dabo.po
/usr/share/locale/it/LC_MESSAGES/dabo.po
/usr/share/locale/ja/LC_MESSAGES/dabo.po
/usr/share/locale/lv/LC_MESSAGES/dabo.po
/usr/share/locale/nl/LC_MESSAGES/dabo.po
/usr/share/locale/oc/LC_MESSAGES/dabo.po
/usr/share/locale/pl/LC_MESSAGES/dabo.po
/usr/share/locale/pt/LC_MESSAGES/dabo.po
/usr/share/locale/pt_BR/LC_MESSAGES/dabo.po
/usr/share/locale/ro/LC_MESSAGES/dabo.po
/usr/share/locale/ru/LC_MESSAGES/dabo.po
/usr/share/locale/sv/LC_MESSAGES/dabo.po
/usr/share/locale/th/LC_MESSAGES/dabo.po
/usr/share/locale/tr/LC_MESSAGES/dabo.po
/usr/share/locale/zh_CN/LC_MESSAGES/dabo.po |
|
lav |
python-module-dabo-0.9.14-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/share/locale/ar/LC_MESSAGES/dabo.po
/usr/share/locale/ca/LC_MESSAGES/dabo.po
/usr/share/locale/cs/LC_MESSAGES/dabo.po
/usr/share/locale/dabo.pot
/usr/share/locale/de/LC_MESSAGES/dabo.po
/usr/share/locale/el/LC_MESSAGES/dabo.po
/usr/share/locale/en/LC_MESSAGES/dabo.po
/usr/share/locale/en_GB/LC_MESSAGES/dabo.po
/usr/share/locale/es/LC_MESSAGES/dabo.po
/usr/share/locale/fi/LC_MESSAGES/dabo.po
/usr/share/locale/fr/LC_MESSAGES/dabo.po
/usr/share/locale/hi/LC_MESSAGES/dabo.po
/usr/share/locale/hu/LC_MESSAGES/dabo.po
/usr/share/locale/id/LC_MESSAGES/dabo.po
/usr/share/locale/it/LC_MESSAGES/dabo.po
/usr/share/locale/ja/LC_MESSAGES/dabo.po
/usr/share/locale/lv/LC_MESSAGES/dabo.po
/usr/share/locale/nl/LC_MESSAGES/dabo.po
/usr/share/locale/oc/LC_MESSAGES/dabo.po
/usr/share/locale/pl/LC_MESSAGES/dabo.po
/usr/share/locale/pt/LC_MESSAGES/dabo.po
/usr/share/locale/pt_BR/LC_MESSAGES/dabo.po
/usr/share/locale/ro/LC_MESSAGES/dabo.po
/usr/share/locale/ru/LC_MESSAGES/dabo.po
/usr/share/locale/sv/LC_MESSAGES/dabo.po
/usr/share/locale/th/LC_MESSAGES/dabo.po
/usr/share/locale/tr/LC_MESSAGES/dabo.po
/usr/share/locale/zh_CN/LC_MESSAGES/dabo.po |
|
lav |
python-module-dialog-3.4.0-alt1.noarch |
unsafe-tmp-usage-in-scripts |
info |
The test discovered scripts with errors which may be used by a user for damaging important system files. For example if a script uses in its work a temp file which is created in /tmp directory, then every user can create symlinks with the same name (pattern) in this directory in order to destroy or rewrite some system or another user's files. Scripts _must_ _use_ mktemp/tempfile or must use $TMPDIR. mktemp/tempfile is safest. $TMPDIR is safer than /tmp/ because libpam-tmpdir creates a subdirectory of /tmp that is only accessible by that user, and then sets TMPDIR and other variables to that. Hence, it doesn't matter nearly as much if you create a non-random filename, because nobody but you can access it. Found error in /usr/share/doc/python-module-dialog-3.4.0/examples/with-autowidgetsize/demo.py: $ grep -A5 -B5 /tmp/ /usr/share/doc/python-module-dialog-3.4.0/examples/with-autowidgetsize/demo.py easily append data. With the {widget} widget, you can see the data stream \ flow in real time. To create a FIFO, you can use the commmand mkfifo(1), like this: % mkfifo /tmp/my_shiny_new_fifo Then, you can cat(1) data to the FIFO like this: % cat >>/tmp/my_shiny_new_fifo First line of text Second line of text ... You can end the input to cat(1) by typing Ctrl-D at the beginning of a \ Found error in /usr/share/doc/python-module-dialog-3.4.0/examples/demo.py: $ grep -A5 -B5 /tmp/ /usr/share/doc/python-module-dialog-3.4.0/examples/demo.py easily append data. With the {widget} widget, you can see the data stream \ flow in real time. To create a FIFO, you can use the commmand mkfifo(1), like this: % mkfifo /tmp/my_shiny_new_fifo Then, you can cat(1) data to the FIFO like this: % cat >>/tmp/my_shiny_new_fifo First line of text Second line of text ... You can end the input to cat(1) by typing Ctrl-D at the beginning of a \ |
|
lav |
python-module-dukpy-0.2.2-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/dukpy
/usr/bin/dukpy-install |
|
lav |
python-module-dukpy-0.2.2-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/bin/dukpy
/usr/bin/dukpy-install |
|
lav |
python-module-ftputil-3.4-alt1.src |
beehive-log-unpackaged-files-found-i586 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/doc/ftputil/README.txt
/usr/doc/ftputil/ftputil.html
/usr/doc/ftputil/ftputil.txt
/usr/doc/ftputil/whats_new_in_ftputil_3.0.html
/usr/doc/ftputil/whats_new_in_ftputil_3.0.txt |
|
lav |
python-module-ftputil-3.4-alt1.src |
beehive-log-unpackaged-files-found-x86_64 |
info |
warning: Installed (but unpackaged) file(s) found:
/usr/doc/ftputil/README.txt
/usr/doc/ftputil/ftputil.html
/usr/doc/ftputil/ftputil.txt
/usr/doc/ftputil/whats_new_in_ftputil_3.0.html
/usr/doc/ftputil/whats_new_in_ftputil_3.0.txt |
|
lav |
python-module-h2-3.0.1-alt3.src |
altlinux-python-obsolete-buildreq-python-dev |
warn |
python-dev is obsolete according to Python Policy (http://www.altlinux.org/Python_Policy). Please, use BuildRequires: python-devel. |
|
lav |
python-module-hyperlink-19.0.0-alt1.noarch |
altlinux-python-test-is-packaged |
info |
/usr/lib/python2.7/site-packages/hyperlink/test/test_common.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_common.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_common.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_decoded_url.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_decoded_url.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_decoded_url.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_parse.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_parse.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_parse.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_scheme_registration.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_scheme_registration.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_scheme_registration.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_url.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_url.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/hyperlink/test/test_url.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details. |
|
lav |
python-module-incremental-17.5.0-alt3.noarch |
altlinux-python-test-is-packaged |
info |
/usr/lib/python2.7/site-packages/incremental/tests/test_update.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/incremental/tests/test_update.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/incremental/tests/test_update.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/incremental/tests/test_version.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/incremental/tests/test_version.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/incremental/tests/test_version.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details. |
|
lav |
python-module-lzf-0.2.4-alt1.src |
altlinux-python-obsolete-buildreq-python-dev |
warn |
python-dev is obsolete according to Python Policy (http://www.altlinux.org/Python_Policy). Please, use BuildRequires: python-devel. |
|
lav |
python-module-m2r-0.11-alt1.qa1.noarch |
altlinux-python-test-is-packaged |
info |
/usr/lib/python2.7/site-packages/tests/test_cli.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/tests/test_cli.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/tests/test_cli.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/tests/test_renderer.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/tests/test_renderer.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib/python2.7/site-packages/tests/test_renderer.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details. |
|
lav |
python-module-m2r-0.11-alt1.qa1.noarch |
rpm-filesystem-conflict-file-file |
warn |
Files /usr/lib/python2.7/site-packages/tests/__init__.py /usr/lib/python2.7/site-packages/tests/__init__.pyc /usr/lib/python2.7/site-packages/tests/__init__.pyo conflict with the package python-module-cron_descriptor-1.2.8-alt1.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
python-module-mwlib-0.15.14-alt2.x86_64 |
init-but-no-native-systemd |
info |
The package have SysV init script(s) but no native systemd files. |
|
lav |
python-module-mwlib-0.15.14-alt2.x86_64 |
init-lsb |
fail |
/etc/rc.d/init.d/mwserve: not systemd compatible: lsb init header missing and mwserve.service is not present. See http://www.altlinux.org/Services_Policy for details. |
|
lav |
python-module-mwlib-0.15.14-alt2.x86_64 |
subdir-in-var-run |
info |
Found a subdir in /var/run or /var/lock. /var/run and /var/lock may be mounted as temporary filesystems, so the init.d scripts must handle this correctly. This will typically amount to creating any required subdirectories dynamically when the init.d script is run, rather than including them in the package and relying on rpm to create them. |
|
lav |
python-module-protocols-1.0-alt0.1.1.2.1.1.x86_64 |
altlinux-python-test-is-packaged |
info |
/usr/lib64/python2.7/site-packages/protocols/tests/test_advice.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_advice.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_advice.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_classes.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_classes.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_classes.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_direct.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_direct.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_direct.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_twisted.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_twisted.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_twisted.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_zope.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_zope.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/protocols/tests/test_zope.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details. |
|
lav |
python-module-psutil-5.6.3-alt1.x86_64 |
altlinux-python-test-is-packaged |
info |
/usr/lib64/python2.7/site-packages/psutil/tests/test_aix.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_aix.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_aix.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_bsd.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_bsd.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_bsd.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_connections.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_connections.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_connections.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_contracts.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_contracts.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_contracts.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_linux.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_linux.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_linux.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_memory_leaks.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_memory_leaks.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_memory_leaks.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_misc.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_misc.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_misc.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_osx.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_osx.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_osx.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_posix.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_posix.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_posix.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_process.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_process.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_process.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_sunos.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_sunos.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_sunos.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_system.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_system.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_system.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_unicode.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_unicode.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_unicode.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_windows.py: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_windows.pyc: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details.
/usr/lib64/python2.7/site-packages/psutil/tests/test_windows.pyo: It is the file in the package whose name matches the format python modules use for test files. It may have been installed by accident. Remove it or move it to the -devel subpackage, if the test is required to build other packages. See http://www.altlinux.org/Python_Policy for details. |
|
lav |
python-module-pybugz-0.9.0-alt1.rc1.1.noarch |
rpm-filesystem-conflict-file-file |
warn |
Files /etc/bash_completion.d/bash-completion /usr/bin/bugz conflict with the package python3-module-pybugz-0.11.1-alt1.2.noarch. Moreover, the packages have no explicit conflicts with each other. You should add explicit conflicts, or, if conflicts are avoidable, consider using alternatives. |
|
lav |
python-module-pydispatcher-docs-2.0.5-alt1.bzr20150114.2.noarch |
buildroot |
fail |
found paths to buildroot: /usr/share/doc/python-module-pydispatcher-docs-2.0.5/pydoc/pydispatch.errors.html: >index
/usr/src/tmp/python-module-pydispatcher-buildroot/usr/lib/python2.7/site-packages/pydispatch/errors.py |
/usr/share/doc/python-module-pydispatcher-docs-2.0.5/pydoc/pydispatch.__init__.html: >